megatrack
11/20/2007 10:20:27 AM
Hi,
My 4x4 doesn't work. When I press on the switch I can hear it engaged but it doesnt work. Switches work fine from 2w to 4w and back, 4 low seems to engage( I can hear it). So to make a story short all the switches work but the front wheels never engaged .
Can anyone help please
Thanks
AJ
swartlkk
11/20/2007 10:23:28 AM
First verify engine vacuum to the front axle engagement actuator located under the battery tray. If you have vacuum there, then I'd bet that the actuator has failed in some way (cracked diaphram, frozen cable, etc).
megatrack
11/20/2007 10:35:44 AM
HI,Thanks for helping,
So you are saying that even if I hear it engaged there can be a vacuum problem.
I will look at it right now.
I am in Vermont we had snow today....already...
Thanks
AJ
megatrack
11/21/2007 1:53:27 PM
HI, I checked the actuator today, It looks like it is working but when I put it in 4HI I can still push the cable in by hand about 1/4 in the actuator. So I am wondering if the actuator is not strong enough to pull on the cable completely. Is it possible?
How to tell if the 4x4 work other than trying it in snow?
Thanks
AJ
