sonicdrft
12/27/2006 6:24:07 PM
First off i have a 94 blazer and i was wandering if someone could help me...My front end looks like it is twisted..It has a gap between the left side part of the hood and grill...It makes the whole truck look like its leaning...So yeah if anyone could help it would be greatly appreciated...
Second is the wiring in the rear tail lights..If anyone has a diagram or can tell me whats what in it...
swartlkk
12/27/2006 8:01:56 PM
Does the hood line up with the fenders on both sides? If not, there should be adjustment screws on the radiator core support at the front corners of the hood. If you adjust them too far, you may have to adjust your hood latch as well.
Has the truck ever been in an accident? If it has, you may have to take some reference measurements to verify that the core support and fenders are aligned properly to the frame.
4lowlife
12/27/2006 8:04:11 PM
Body mounts crushed/worn?
sonicdrft
12/29/2006 10:42:37 AM
first off yes the truck has a salvage title to begin with..how would i go about doing the measurements?and where and how would i look for the body mounts?thanx for the help and im sorry if i make thing complicated..im pretty new to the body part of all this...thanx again
