B85s10blaze
3/26/2008 8:57:38 PM
Alright i have a 1985 s10 blazer 2.8 v6 and cant find where to put a aftermarket oil pressure and water temp gauge...any ideas thx
Hanr3
3/29/2008 7:14:23 PM
On the A pillar (the one that goes up from the dash to the roof). Check Summit or LMC for the pod.
B85s10blaze
3/30/2008 8:41:58 PM
Srry guys guess i should have made it a little more clear i cant figure out where to hook up the oil pressure gauge to the engine got the temp just fine thx and srry
neo71665
3/31/2008 1:51:32 PM
Do you have the factory gauges and keeping them, don't have them, aint keeping them?
The factory one hooks up right above the oil filter in the adaptor/block (depending).
If your got the factory gauge and keeping it working you can get a t at any hardware store and just install it.
if you aint got the factory gauge there should be a plug in the above location.
if you got it and don't care you can just unhook the factory sender and screw your new one in (might need an adaptor)
