cash50
2/28/2008 12:25:55 PM
I bought an ebay intake and it came with two small brackets. One is longer and rectangular. The other is a shorter rectangle with a 90 degree bend in it. I'm not sure where to put these brackets and my intake is hitting up against something when I drive. Anyone know where these good or how to stop the intake from clinging up against stuff?
EuroGoldLS
2/28/2008 1:34:43 PM
That ain't good. It shouldn't even come close to hitting any moving parts. It would help to know the year model of your Blazer to better help you.
cash50
2/28/2008 2:05:04 PM
It's a 96 Blazer. Also it's not hitting any moving parts, just banging up against part of the radiator and what I think was the power steering fluid housing.
There are no supports so the intake is just kinda hanging freely, causing it to sag down a bit, which is why it is hitting these things.
cash50
2/28/2008 2:10:14 PM
This is what it looks like. It's banging in between the throttle body and MAF sensor on the bottom/back side. Also , the cone filter is banging up on the radiator. Where do the brackets go?
otnietdehoooo
2/28/2008 3:13:59 PM
my intake (k&n) came with a semicircular bracket that uses a hose clamp to support the lower intake pipe. the circle bracket connects to an L-shape bracket which bolts onto the stock airbox mount... im sure there is a way to fab up a bracket to hold the lower part of the intake.
click to zoom
