thanser
1/28/2006 6:09:15 PM
That's a handy light under the hood, near the trailing edge. But mine isn't working.
The lamp is good, I checked it with a multimeter.
Is there a mercury switch that activates it when the hood is up? Where is it located?
Easy to fix this? Has anyone ran into this problem?
Thanks!
4lowlife
1/28/2006 6:31:21 PM
thanser
1/28/2006 6:39:28 PM
So, if the light doesn't come on, I'm to assume the whole lamp socket needs to be replaced?
It's not on its own fuse, is it? I wouldn't think so.
Thanks!
4lowlife
1/28/2006 6:42:14 PM
With the hood up, obviously, stick a multimeter in the bulb hole (volts dc,) and see if you get any voltage readings.
thanser
1/28/2006 6:50:09 PM
It was hard enough to get the bulb out and then in again, but I'll give it a shot.
I might have to take the bulb socket off the hood to make the correct contacts.
But, YES, it might be easier to do this with the hood UP...!