Logan
3/26/2008 5:45:14 AM
Waiting for my suppplier to here from his supplier, so I thought id ask you guys.
Will a mount for a 2001 blazer/jimmy 4X4 work on a 2002 blazer/jimmy 4X4??
Been wondering why my K&N intake keeps comming off. Dam engine was lifting about 3-4" up on the drivers side.
rriddle3
3/26/2008 6:28:01 AM
The AutoZone website shows them to be the same part number.
drperry
3/26/2008 6:36:44 AM
Get the Energy Suspension mounts, instead of factory replacements... They'll last a whole lot longer.... Actually, from what I've heard, you won't break them 4x4ing ;)
Synergy Offroad carries them.
Logan
3/26/2008 7:25:59 AM
So the one from Energy Suspension thats listed for 2001 Should work. hmmm. I think I may get that one.
drperry
3/26/2008 2:03:54 PM
If you offroad at all, they're a good investment... I'm picking up a set + transmission mount, soon as I can afford it, before mine break, lol.
Logan
3/27/2008 7:21:34 AM
Oh, ill be off road alot this summer. Well, between car shows with the lude anyways
drperry
3/27/2008 2:08:45 PM
Then you're definitely going to want the Energy Suspension mounts
Especially if you use 4LO
Logan
3/28/2008 6:28:29 AM
#%#$in engine mount. Almost 3 hours to change. GM put the steel brake line in the way, plue that front diff blocks any access from underneith. Got it in eventually. Probably easyer if I undid both sides, but im stubbern.
drperry
3/28/2008 7:11:54 AM
From what I've been reading... You only unbolt one side at a time, however, you loosen the opposite side...
