SCOTTY
2/27/2008 12:06:09 PM
Hi All:
Does anyone know if a 2001 4.3 Vortec out of an S-10 pickup will go into a 96 S-10 4.3 vortec Blazer with minimal problems? any help is greatly appreciated.
Scott
swartlkk
2/27/2008 12:25:40 PM
Should be no sweat. They are basically the same motor. It wasn't until mid-02 that things started to change minutely with some of the sensors, etc. Your y-pipe and wiring harness will have to be used as your truck will have 4 O2 sensors and the associated wiring for it, but everything else should be the same.
SCOTTY
2/27/2008 3:30:49 PM
How about the computer end of it? Also someone mentioned the injectors are probably different?? I don't want to buy it if it won't work
swartlkk
2/27/2008 4:12:37 PM
The injectors are backwards compatible, but as I said, that didn't change until mid-'02. Everything on the '01 motor will be the same as what is on your motor. Wiring removed and sitting on engine stands, you shouldn't be able to tell any difference between the two.
SCOTTY
2/28/2008 9:07:44 AM
ok, thanks alot, i am going to go for it then
scott
swartlkk
2/28/2008 9:17:43 AM
No problem! Sounds good!!
Be sure to let us know how things go when its all said and done. And if you have any questions along the way, just let us know and we'll do our best to get them answered!
SCOTTY
3/18/2008 4:45:42 PM
Anybody know how many bolts are in the bell housing/block? I took out 7 but can't seem to break it apart....1996 S-10 blazer 4.3 Vortek
