Tippman7641
2/9/2008 5:11:04 PM
i ggot a pm from extreme awhole ago about how i did my neons, well i got bored afther work today and took pics of the set up
that is only plug u see that goes to a splitter to power everythin
the thing in the white circle is ths 4-way spliter
thisis on the drivers side
the controls, that knob kind of thing, that is just sitting there use to be attached, but the glue broke, and i havent had time to re attach it
Tippman7641
2/9/2008 5:20:25 PM
i hate seeing any wires, and when you do wee the wirs they need to be as neat as possible lol, and ty
blznlowxtreme
2/10/2008 6:47:26 AM
looks pretty good, i am thinking of doing domething like that, i think i will wire in the plug in to the back of the cig lighter so you wont see it at all though
subzero2
2/10/2008 6:59:27 AM
I hard wired mine to the battery with my distributor box under the dash and the switch i mounted in the panel where the passenger airbag switch usually is...it made it quite a bit cleaner with less wiring in the dash...i put a LED switch in blue just for a little reminder that it was on...neons damn sure can kill a battery quick! Nice install though!
cloak01ls
2/10/2008 8:18:14 AM
Tippman7641
4/4/2008 8:30:37 PM
bump
i wanna see if anyone else has done anything like this and how you set it up
NVANZEE
4/5/2008 1:50:52 PM
My lights also plug into the 12v outlet but i pulled the outlet out of the trim, so know it is pluged in and hidden from site. O btw i happend to find a trim pannel of an s10 at work so i swaped them since the s10 pannel only has one outlet hole compared to the blazers two.
