robert
3/6/2007 9:56:14 PM
recently purchaced a 2000 blazer previous owner only gave dealer the 2 keys no remotes how can you tell if this vehicle is equipped with this option
bgillette78
3/6/2007 11:03:10 PM
if you look at the rear hatch button. if it has no key hole then it is equipped and if it does then it usually is not
aspenpup
3/7/2007 2:51:22 AM
eBay has a bunch of people who sell replacement remotes. There is a procedure to sync the new remote to your car.
swartlkk
3/7/2007 7:35:14 AM
You may already have the RKE (Remote Keyless Entry) module installed. It should be located above the DLC (Data Link Connector). If you have RPO code
AU0 (A U Zero), then you already have the RKE module and a previous owner must have lost the remotes (check inside the glove box). If you do not have RPO AU0, then look around in the junkyards for a blazer with it, and pull the RKE module and possibly 1-2 ft of wire after the electrical connection to the RKE module. I believe that if you have power locks, the RKE wiring is there, but I have been wrong before.
Here are two threads on this subject (search function works...):
keyless entry fob Adding Keyless Entry Good luck and let us know if you need any more information.
BobTheBlazer
3/7/2007 2:26:02 PM
IIRC my truck has remote keyless entry, but still has a keyhole in the back. But could be because my truck is an older model, I'm not too familiar with the newer models....yet.
mike31503
4/12/2007 8:46:05 PM
In all the numbers in the glovebox I see AU0..... So I guess that means yes. Where is RKE module located in my 1995 4dr blazer....? Thanks ahead
kerander
4/19/2007 3:05:53 PM
see my post on RKE in the diy section
getonerd
4/20/2007 10:45:30 PM
is anyway that i can check it
some numbers in the glove box been faded
1GNCS18W12K105182
