maxed outTorsion bars

So. i finally got under my blazer today to crank up the t-bars a,lil bit. And im confused. THe passn rubs a lil bit so i was going to crank it up so it wouldnt, but.... once i was under there i noticed that the passnger side is maxed out! and it still sits lower than the driver side( the driver side looks to have never been touched) I have never done anything like this on this car. So is that normal? What is the problem. THanks!

I had to level mine out as well but it's not maxed out.  Sounds like you have a sagging torsion bar on one side.  If it's bothering you it will need to be replaced just like a sagging leaf or coil spring.

Might also want to check the shock up front.  If that shock is blown, all the weight is on the bar, when normally the weight is shared between shock/bar.  But it sounds like it's probably just the bar since someone's already tried to fix it (bolt all the way in).