ZEKESCHWARZ
8/27/2007 11:12:14 AM
I have a 2000 Blazer that I want to convert to MFI, Some time back there was part numbers listed for the kit and gaskets but I can not find. Any help ? Zeke
swartlkk
8/27/2007 1:33:07 PM
Here's the thread that has the part numbers:
Hard Starting - Fuel Pressure Concepts Please note that all you need is the spider assembly. The new assembly fits in the old bracket. The rest of the o-ring seals for the upper plenum, etc are available separately from many sources, but are not really necessary so long as you clean and inspect your original seals. The new MFI comes with new fuel link o-rings, but you may want to get new o-rings for the fuel lines at the back of the engine, I know I cut one and needed to replace it.
