first gen blazer parts almost anything you could want
Login  | |
|
first gen blazer parts almost anything you could want - 10/13/2007 9:46:42 PM
|
|
|
p3313r
Posts: 68
Joined: 2/21/2007
Status: offline
|
i have two blazers im parting out both were 4.3 4x4 the body's are trashed but some good parts
4.3 engine runs beautifully lots of pressure
transfer case (push button)
all glass
wheels
spare tire carriers
digital dash
driveshafts
4.3 parts
let me know what you want
pm me
thanks items located in Mansfield, OH 44903 some stuff can be shipped
< Message edited by p3313r -- 10/13/2007 9:49:22 PM >
_____________________________
[img]http://www.s10forum.com/forum/attachment.php?attachmentid=93815&d=1201931908[/img]
|
|
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/14/2007 9:41:40 PM
|
|
|
BigJoeFord
Posts: 34
Joined: 5/5/2007
Status: offline
|
do either of them have a trans with lows miles and no issue. if so pm me and let me know what ur looking to get for one of them . thanks Joe
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/15/2007 8:14:21 PM
|
|
|
p3313r
Posts: 68
Joined: 2/21/2007
Status: offline
|
sorry one trans is blown and the other was just sold
_____________________________
[img]http://www.s10forum.com/forum/attachment.php?attachmentid=93815&d=1201931908[/img]
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/16/2007 5:47:22 AM
|
|
|
drperry
Posts: 3926
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
60/40 split bench front seats? lol
What years are these?
_____________________________
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/16/2007 6:42:32 AM
|
|
|
p3313r
Posts: 68
Joined: 2/21/2007
Status: offline
|
91 and 92 both bucket seats
_____________________________
[img]http://www.s10forum.com/forum/attachment.php?attachmentid=93815&d=1201931908[/img]
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/16/2007 9:04:39 PM
|
|
|
Blazin_Jason
Posts: 1101
Joined: 5/17/2006
From: Van Isl, B.C.
Status: offline
|
Do you have any cup holders that go on the front of the center console? I might be interested in all the hardware for mounting a spare tire carrier. I have the actual swing out piece, but not the other pieces.
_____________________________
85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s
89 Jimmy 4x4, 2 door, 4.3/auto
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/17/2007 6:23:53 AM
|
|
|
p3313r
Posts: 68
Joined: 2/21/2007
Status: offline
|
ya i should have the hardware to mount a carrier do you just need the bolts for the swingarm and the bolts and plate for the lock? ill look at center console they are floorshift 4x4's and im not sure if there is cupholders
_____________________________
[img]http://www.s10forum.com/forum/attachment.php?attachmentid=93815&d=1201931908[/img]
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/17/2007 6:41:00 AM
|
|
|
Blazin_Jason
Posts: 1101
Joined: 5/17/2006
From: Van Isl, B.C.
Status: offline
|
I'll double check what I would need. I think I only have the carrier, no hinges or anything else. I thought those parts were in a box when I bought the truck, but they weren't.
_____________________________
85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s
89 Jimmy 4x4, 2 door, 4.3/auto
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/20/2007 4:28:45 PM
|
|
|
WILDBILL302
Posts: 1
Joined: 10/20/2007
Status: offline
|
hey whats goin on i live in akron so not that far i need a gas tnak for my blazer...its a 94 4wd and 4dr will one of your fit? let me know i can come down this weekend to get it..bgh302@yahoo.com
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 10/25/2007 8:27:05 AM
|
|
|
CrashPro993
Posts: 15
Joined: 10/25/2007
Status: offline
|
How much for the driver side front window glass? Had someone just break in this morning.
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 11/3/2007 5:52:10 PM
|
|
|
mtone132000
Posts: 7
Joined: 3/16/2007
Status: offline
|
do you have a center console that will fit a 92? light grey?
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 11/3/2007 8:44:04 PM
|
|
|
bcy27
Posts: 2
Joined: 11/3/2007
From: FT Luaderdale,FL
Status: offline
|
I need a set of front seats do you have any and what are the condition and also you said you have a transfer case how much would you take for it??
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 11/4/2007 11:35:31 AM
|
|
|
p3313r
Posts: 68
Joined: 2/21/2007
Status: offline
|
center console is blue and the door on top is broken like 85% of them
my front seats are pretty dirty right now but i dont think they are torn but they have 220,000 miles and the t-case i have left is a floor shift and it is coupled to the blown transmission i have in the truck and i am unsure of its condition. also i will not ship them i am in Mansfield, OH 44903
_____________________________
[img]http://www.s10forum.com/forum/attachment.php?attachmentid=93815&d=1201931908[/img]
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 11/16/2007 6:53:18 PM
|
|
|
WutEffinChevy
Posts: 1
Joined: 11/16/2007
Status: offline
|
i have a 94 2 door blazer, was looking for an armrest + the trim ring that it sits on. Let me know if you have and what color, zip is 32693.
Thx.
|
|
|
|
|
RE: first gen blazer parts almost anything you could want - 11/20/2007 12:38:18 PM
|
|
|
bobslsc
Posts: 11
Joined: 11/14/2007
Status: offline
|
I need the ABS assembly for a '93 blazer 4.3. Do you have a good working unit? If so, how much?
|
|
|
|
 Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Blazer Prices
Chevy Blazer
Trailblazer SS
Advertising Info
|
Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|
Printable Version
