Idles rough with a knock...
Login  | |
|
|
|
|
|
RE: Idles rough with a knock... - 10/18/2007 11:28:27 AM
|
|
|
Chevy Lover
General Tech Moderator
Posts: 3411
Joined: 6/11/2006
From: Vancouver. B.C. Canada
Status: offline
|
Hmmm...I wonder if you have a carbon build-up.
How did the plugs look..oil foulded?
Is the knock from the bottom or the top of the engine and is it constant, or just on acceleration or on decelleration?
_____________________________
Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time
|
|
|
|
|
RE: Idles rough with a knock... - 10/19/2007 1:42:32 AM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
I can only hear it on idle... From the drivers seat that's the only time you can hear it...
The plugs did have a fair amount of blackness on the flat round surface in the combustion chamber , however the electrode and where it arcs to weren't fouled in any way...
I'm not sure where the knock is coming from, I'm assuming from the middle of the engine and up, lol.
It stopped for a few days after I changed the plugs... Maybe she's just running a little rich for idle... I'll see if I can snag a soundclip of it or something...
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 2:38:25 AM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
Update:
The knock only happens when it drops to about 600 - 700 RPM and lower.... It does not happen any RPM higher than that...
It also seems to only happen when the engine is warmed up...
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 4:00:02 AM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
is it a loud knock or soft knock does it sound like a metal to metal knock and since its only at idle i wonder if its pinging and not knocking im thinking i may know what it is but not sure just a guess im wondering if its your lifters or valves chattering just a guess though someone may have something better
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 9:10:52 PM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
Well, it's not a loud noise overall... Could be pinging, I suppose, lol.
But like I said, it disappears soon as it gets back up to the normal 900RPM or so (which has to be done manually, once it's been warmed up enough, the RPM's drop).
I think it's the low RPM making it knock/ping and such...
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 9:17:36 PM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
k does it seem more like a mechanical type of fix or something that can be helped by using higher grade gas and maybe even a fuel system cleaner another thing you can try is lucas oil stabilizer it takes a while to put in but it makes a difference see if any of that might help i know one of the others on the forum may have a better solution im just adding options that don't cost alot. hope it helps
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 9:26:04 PM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
Well, we'll see what an oil change nets me... It's been about 5000 or so km, so it's about due... Hopefully that'll help...
Gonna be getting a new fuel filter and air filter, too...
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 9:30:46 PM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
cool yea when you do the oil if you decide to go with the lucas it replaces exactly one quart of oil so instead of 4.5 quarts you would just by 4 quarts and get one bottle of lucas put the lucas in first cause the oil you put in after will help it curcilate better and get in the system faster plus then you will have a half a quart left of regular oil so another thing too is for the lucas they have two types one for regular oil and one for synthetic the black label is for synthetic and the other is for regular let us know when you change your oil if it helps it helped mine alot ran cooler and better after i did it.
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 10:07:31 PM
|
|
|
swartlkk
Posts: 14532
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
|
As this seems to be an engine performance issue, I fail to see how an oil stabilizer will help... As a rule of thumb, I stay away from the "meracle in a bottle" type products that are in for the duration.
Anyway, Dennis, when was the last time you did an upper intake cleaning? It may be time for one. I know I'll be doing the smoke show the next time I do an oil change on my Rainier and that only has 28k miles on it. Go grab yourself a bottle of Seafoam and run it through the throttle body. Since you just replaced your plugs, you shouldn't have any problem with them. Do the seafoam right before you change your oil. Warm up the engine. Remove the intake duct work, unplug the MAF sensor. Dribble 2/3rds of a bottle down through the throttle body with the engine running and your hand on the throttle to keep it running. With the last 1/3rd of a bottle, pour it in and let the engine stall. If it doesn't stall, have someone there to shut off the engine a short bit after you pour the last in. Don't worry, you won't damage the engine. Let it sit for a good 1/2 hour then drive it like you stole it until the smoke stops coming out of the tail pipe. Change the oil and you're done.
See how that goes. It's been a long time since I have recommended this and come to think of it, with the carbon buildup problems that these engines have, this could be the cause for a lot of peoples problems!
_____________________________
Kyle-
04 Rainier
My Restoration Projects
Please Do Not PM for Tech Help
|
|
|
|
|
RE: Idles rough with a knock... - 10/21/2007 11:11:56 PM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
yea the miracle in a bottle thing i stay away from but when the stuff works i push it to people to try for themselves and let me know if it worked for them or not. Your idea is perfect which i need to try on mine it has 121,000 on it now and i think it might need it to clean it out but question on the sea foam do you have to do an oil change after you use it?
< Message edited by thegr81 -- 10/21/2007 11:12:59 PM >
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 2:33:27 AM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
So far as I know, it's never been done... I've owned the Blazer for about 13,000km (8000 miles)... I suppose it could be due for a top end clean after 62,000km's (38500 miles) lol.
I usually use GM Top Cleaner when I do that... I have yet to find Seafoam in my city... I'll keep an eye out for it, though...
And thegr81, you don't have to change the oil afterwards at all, It just makes more sense for me to do that afterwards, as the oil will flow nice and free after having the piss driven out of it, lol.
I when I did it on my old Z34, I smoked out the entire block when that sucker started back up, lol... It was much easier to do on the S10, though... a vertical pointing throttle body is so much nicer...
Actually, after figuring out the trick for the 3rd plug, if it kills the plugs, I'm not overly worried...
I guess even hard driven vehicles get carbon build up, lol
Thanks for the reminder about that! I'd completely forgotten about the top cleaner part...
< Message edited by drperry -- 10/22/2007 2:34:22 AM >
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 3:00:20 AM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
not a problem just wanted to help anyway possible sometimes it helps to back another forum person's thoughts and recomondations up if you agree that helps the person taking the info and using it more than just one person's thoughts
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 4:07:17 AM
|
|
|
swartlkk
Posts: 14532
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
|
GM Top Engine Clean is a great product, but it is quite a bit more expensive than Seafoam.
The reason for the oil change after a top engine clean is the possibility of the cleaner washing down past the rings. It is just safer to do a top engine clean right before you do an oil change to reduce the likely hood of problems with the oil.
_____________________________
Kyle-
04 Rainier
My Restoration Projects
Please Do Not PM for Tech Help
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 4:26:50 AM
|
|
|
thegr81
Posts: 2621
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
|
cool i never done that before so i just wanted all the info thanks kyle appreciate it i will do it the next time i do a oil change in 2500 miles i just did one so im going to wait thanks again
_____________________________
2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 8:22:40 AM
|
|
|
drperry
Posts: 3901
Joined: 1/12/2007
From: GP AB CA
Status: offline
|
The GM Top Clean usually costs me like $8... Seafoam must be dirt cheap!
_____________________________
|
|
|
|
|
RE: Idles rough with a knock... - 10/22/2007 8:29:28 AM
|
|
|
otnietdehoooo
The Chop Shop Moderator
Posts: 1627
Joined: 5/25/2007
From: Ft. Worth, TX
Status: offline
|
ive never seen gm top cleaner but around here, a can of seafoam is about $6.50
_____________________________
Matt - 98 4DR 4WD
|
|
|
|
|
Printable Version
