03 Blazer 4x4 fitment question

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

03 Blazer 4x4 fitment question

Printable Version

Blazer >> Modifications >> Tires and Wheels >> 03 Blazer 4x4 fitment question

Page: [1]

Message

<< Older Topic Newer Topic >>

03 Blazer 4x4 fitment question - 10/26/2007 7:10:39 PM

brunosrk

Posts: 8
Joined: 4/15/2007
Status: offline

I have a 03 4x4 2 dr Blazer LS. I'd like to put a set of Weld Pro Stars on it. These are the specs of the ones I'm looking at. 15x7, 5.5 inch backspace and 38.00 mm offset. I'm also thinking of running 30 inch tires. What you think?

Post #: 1

RE: 03 Blazer 4x4 fitment question - 10/28/2007 11:50:05 AM

Hanr3

Wheels & Tire Moderator
Posts: 3523
Joined: 5/11/2005
Status: offline

sounds like a plan. Post up some pics.

_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to brunosrk)

Post #: 2

RE: 03 Blazer 4x4 fitment question - 10/28/2007 2:57:45 PM

brunosrk

Posts: 8
Joined: 4/15/2007
Status: offline

So you don't think I'll have many problems with the wheels I described?

(in reply to Hanr3)

Post #: 3

RE: 03 Blazer 4x4 fitment question - 10/28/2007 4:29:20 PM

lennyblazer

Posts: 1988
Joined: 5/6/2007
From: Appleton, WI / Houghton, MI
Status: offline

It sounds like those should work perfect, they will stick out about a half inch more than stock and then with the 30x9.5" tires you will have about a .5"-1" wider tread pattern IIRC. So it should fit in there no problems with the stock suspension setup. Otherwise you could crank the torsion bars about a half inch if you need just a litte bit more clearance. But I think the 30" tires should work fine.

_____________________________

-Lenny
4.3L Auto. 3.73Gears