timing bypass

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

timing bypass

Printable Version

Blazer Forum >> Modifications >> Performance & Brainstorming >> Engine & Internal >> timing bypass

Page: [1]

Message

<< Older Topic Newer Topic >>

timing bypass - 12/19/2005 10:14:22 AM

94 blazer

Posts: 1
Joined: 12/19/2005
Status: offline

I have the 1994 blazer 4.3L vortec. in order for me to adjust my timing or to check it, I need to unplig a wire to set it in bypass mode. a tan wire with a black lead. I still cannot find it. any help would be apperciated.

Post #: 1

RE: timing bypass - 12/19/2005 10:50:35 AM

swartlkk

Posts: 15276
Joined: 5/1/2005
From: Waterloo, NY
Status: online

It depends on where your computer is. If the PCM is in the passenger compartment, then it should be under the passenger side carpet all by itself. It should be near the transmission tunnel. I have seen some references that put it on the drivers side of the trans tunnel, but that was with a rubber flooring not carpet. If your PCM is under the hood, then you'll have to dig for it in the main wiring harness near the blower motor.

Good Luck

_____________________________

Kyle-