Wheel spacers

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

Wheel spacers

Printable Version

Blazer Forums >> Modifications >> Tires and Wheels >> Wheel spacers

Page: [1]

Message

<< Older Topic Newer Topic >>

Wheel spacers - 11/18/2007 3:11:47 PM

jdblazin

Posts: 34
Joined: 11/18/2007
Status: offline

1994 S10 Blazer 4x4: I want to space out the back wheels to be flush with the front. Is the differance 3/4"? If so then can I just buy 3/4" spacers for the back? I might even want to go wider on all four after a little lift but I still want them to be flush. How wide can I "safely" go? I see some of you are going 2". Also where is a good place to order spacers? Thanks

Post #: 1

RE: Wheel spacers - 11/18/2007 5:52:41 PM

otnietdehoooo

The Chop Shop Moderator
Posts: 1669
Joined: 5/25/2007
From: Ft. Worth, TX
Status: offline

yes, the difference is 3/4"

i dont know if i have seen 3/4" spacers though, most of the wheel spacers are at least 1" or 1.25" so there is enough room to fit the old lugs inside of the spacers.

i think the ones on ebay are as good as any, they all say they're billet aluminum so im assuiming they are pretty strong. just search ebay for "CORVETTE WHEEL SPACERS" (corvette will bring up more results)

_____________________________

Matt - 98 4DR 4WD

click me!

(in reply to jdblazin)

Post #: 2

RE: Wheel spacers - 11/19/2007 4:39:39 PM

jdblazin

Posts: 34
Joined: 11/18/2007
Status: offline

Thanks, I'll check it out.

_____________________________

1994 S10 Blazer Tahoe LT
4X4 4Door
4.3 Vortec/Auto
Flowmaster Exhaust

(in reply to otnietdehoooo)

Post #: 3