JET Performance Programmer 4 Sale
Login  | |
|
JET Performance Programmer 4 Sale - 11/26/2007 4:52:39 PM
|
|
|
BlazerSS
Posts: 139
Joined: 3/25/2007
Status: offline
|
I am selling my brand new performance programmer from JET. It is only 2 months old. Unfortunate circumstances have left me jobless and I need the money. This programmer really woke up my truck and I gained an approximate 1mpg with the premium octane tune as well! I copy and pasted everything off JET's website so you know exaclty what this programmer is capable of. The box says that it is good on '01'-'06' GM 4.3L I am selling this for $250 + shipping. There are no flaws or scratches. Let me know if you are interested. Thanks
The JET Performance Programmer lets you take control and program your own vehicle computer to match your driving style. JET’s exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for midgrade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The advanced technology and design of the JET Programmer gives you the ability to modify air and fuel ratios, ignition timing, shift points, shift firmness, speed limiter and rev limiter settings. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. Also includes a built in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions. Take the next step in performance tuning with the JET Performance Programmer!
-Tri-Power performance tuning modes for regular, midgrade or premium fuels
-Raise or lower top speed and rev limiter!
-Correct speedometer and turn off ABS light after making gear ratio or tire size changes
-Modify transmission shift points and shift firmness
-Read and clear factory diagnostic trouble codes (turn off check engine light)
-Change electric fan turn on temperature
-Bypass computer aided gear selector in manual transmissions
-User friendly programming procedure
-Available for most GM gas and diesel applications
NEW! JET Performance Programmers for gasoline powered applications now include a built in scan tool with live data monitoring. This new feature allows real time monitoring of several vehicle sensors for fine tuning and troubleshooting. The following vehicle parameters can be monitored with the scan tool function:
-Calculated Load Value
-Engine Coolant Temperature
-Short Term Fuel Trim 1 & 2
-Long Term Fuel Trim 1 & 2
-Manifold Pressure (MAP)
-Engine RPM
-Vehicle Speed
-Spark Advance
-Inlet Air Temperature
-Throttle Position
-02 Sensors Bank 1 & 2
-Mass Air Flow Value
_____________________________
2005 Blazer M50 5-Speed 8.5 rear w/3.42 gears
Goodyear Fortera Silent Armor P235/75/R15
w/Schrader nickel valves, stems, & caps
K&N 63 Series w/Drycharger wrap
Magnaflow w/2.5" Mandrel Piping
Wait4Me Tune w/93 Octane
|
|
|
|
|
|
|
Printable Version
