JBA Headers (Full Version)

Blazer Forums >> Modifications >> Performance & Brainstorming

JBA Headers

  

cain_45 -> JBA Headers (12/13/2007 4:55:26 PM)

Ok wanting more performance....I have a 2003 Blazer 2WD 2DR.  I've read several posts about headers and I'm a little confused.  Does mine have AIR injection?  Besides the headers which I found are about $600, is there anything else I need to bolt these up?  I have a K&N FIPK & Gibson catback on it now so headers should give good results.

  
aris_unlimited -> RE: JBA Headers (12/14/2007 5:37:33 AM)

In the glove compartment you should have a sticker with a bunch of RPO codes on it. Get the codes then you can find a code deciphering page here.

http://www.blazerforum.com/m_21168/tm.htm


If you have the code for air injection you have air injection. If not you are good to get the cheaper set of headers.

cain_45 -> RE: JBA Headers (12/14/2007 7:46:57 AM)

SO besides the headers do I need anything else to make these work?  I noticed it said something about "spark plug boots" being modified or elongated or something.

aris_unlimited -> RE: JBA Headers (12/16/2007 7:43:44 AM)

Do you have a link to the web page where you found these headers? I am going to use the JBA headers, when I can afford them and I have never seen any notes like that about them. I will get them from summitracing.com .

  

Page: [1]

Return to Blazer Forum home page or view the Full Version of this page.