Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

Broke down tonite had to be towed...

  Printable Version
Blazer >> Mechanical & Maintenance >> Engine & Transmission >> Broke down tonite had to be towed... Page: [1]
Login
Message << Older Topic   Newer Topic >>
Broke down tonite had to be towed... - 12/26/2007 3:47:24 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
Boo Hoo!!!!!!!   Leaking antifreeze all over the damn place..... Its turns out after putting the pressure tester on it that the rec water pump install i did, the gasket on the pass side blew out!!! In all the years ive been fixin cars and have done plenty of water pumps ive NEVER had that problem...  I was told that the thermostat that i put in may be too high in pressure  Its a 195 deg temp which is exactly what i took out of it..  soooooooooooooo when i feel like fixin it i will... any thoughts on the temp of the thermo i have in it?????
Post #: 1
RE: Broke down tonite had to be towed... - 12/26/2007 3:58:08 PM   
Chevy Lover


General Tech Moderator
Posts: 3411
Joined: 6/11/2006
From: Vancouver. B.C. Canada
Status: offline
Chevy Lover's photo gallery
The 195 thermostat should be no problem. I have no idea why the gasket blew out unless the bolts were not tight enough.

_____________________________


Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time

(in reply to 2002XTREME)
Post #: 2
RE: Broke down tonite had to be towed... - 12/26/2007 4:24:11 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
I dont see how that happened either but the water pump bolts are tight. I checked them
I have to get under it and find out where the rest of the water is coming out it looks like more that the gasket went out on me.. I`m thinkin freezeout plug

(in reply to Chevy Lover)
Post #: 3
RE: Broke down tonite had to be towed... - 12/26/2007 4:37:49 PM   
felonyblazer96

 

Posts: 464
Joined: 11/4/2007
From: Utica ny
Status: offline
felonyblazer96's photo gallery



are the freeze plugs on the rear of the engine?



(in reply to 2002XTREME)
Post #: 4
RE: Broke down tonite had to be towed... - 12/26/2007 4:42:47 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
Freezeout plugs are normally on all four sides of the block   diff sizes in diff areas...

(in reply to felonyblazer96)
Post #: 5
RE: Broke down tonite had to be towed... - 12/26/2007 4:43:59 PM   
felonyblazer96

 

Posts: 464
Joined: 11/4/2007
From: Utica ny
Status: offline
felonyblazer96's photo gallery



thanks man...well im leakin antifreeze 2 :(



(in reply to 2002XTREME)
Post #: 6
RE: Broke down tonite had to be towed... - 12/26/2007 4:49:36 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
I`ll letcha know how my catastrophe goes

(in reply to felonyblazer96)
Post #: 7
RE: Broke down tonite had to be towed... - 12/26/2007 7:03:41 PM   
swartlkk


Posts: 15292
Joined: 5/1/2005
From: Waterloo, NY
Status: online
swartlkk's photo gallery
Felony, there are no freeze plugs on the back of the block.  Here is a thread where I posted pictures.  It was determined that the plugs that are on the back of the block are for the cam and the balance shaft in the picture shown.

How many freeze-plugs in my engine?



_____________________________

Kyle-

My Restoration Projects
Please Do Not PM for Tech Help

(in reply to 2002XTREME)
Post #: 8
RE: Broke down tonite had to be towed... - 12/26/2007 7:22:22 PM   
felonyblazer96

 

Posts: 464
Joined: 11/4/2007
From: Utica ny
Status: offline
felonyblazer96's photo gallery
thanks swartlkk

(in reply to swartlkk)
Post #: 9
RE: Broke down tonite had to be towed... - 12/29/2007 5:46:07 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
update to leaking problem...  I replaced the gaskets on the water pump to block!!   worked out great put felpro brand in...  My next question ,not in regards to that problem but what temp does anyones blazer run at???  I`m runnin about 2 or 3 lines below 210 deg..  I have the 4.3 if it matters any...   Tanks boyz....

(in reply to felonyblazer96)
Post #: 10
RE: Broke down tonite had to be towed... - 12/29/2007 5:48:47 PM   
felonyblazer96

 

Posts: 464
Joined: 11/4/2007
From: Utica ny
Status: offline
felonyblazer96's photo gallery



mine stays in the middle if its over that maybe its your thermostat thats what happened to me when i replaced it (garage replaced it) it stays half way



(in reply to 2002XTREME)
Post #: 11
RE: Broke down tonite had to be towed... - 12/29/2007 5:51:19 PM   
2002XTREME

 

Posts: 812
Joined: 10/7/2007
From: Long Island
Status: offline
2002XTREME's photo gallery
i`m def lower than 210 on my guage   with a 195 thermo...

(in reply to felonyblazer96)
Post #: 12
RE: Broke down tonite had to be towed... - 12/29/2007 5:53:07 PM   
felonyblazer96

 

Posts: 464
Joined: 11/4/2007
From: Utica ny
Status: offline
felonyblazer96's photo gallery



maybe swartlkk can help you



(in reply to 2002XTREME)
Post #: 13
RE: Broke down tonite had to be towed... - 12/30/2007 9:42:30 AM   
4x4willywill


Posts: 89
Joined: 12/22/2007
From: Parma Ohio
Status: offline
mine slowly floats between the 1/4 mark to right b4 210 then kinda flutters around in that area .. i will take a pic for ya and also my truck is a 95/4.3 "W" and my brother has the 98 v.6 X motor and i think his does same for temp ... will have to check to make sure tho

_____________________________

1995 4x4 4door silver blazer 4.3l v6 "W" engine horizontal plug wires lol
1988 Mazda Rx7 Gxl Red (possibly for sale)

(in reply to felonyblazer96)
Post #: 14
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Blazer Forum >> Mechanical & Maintenance >> Engine & Transmission
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk15292
drperry3926
hanr33523
chevy lover3411
m00nwater3269
eurogoldls3121
wolfpack3072
paddle_grl2953
hillbillyino2887
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.