|
swartlkk -> RE: wiring harness interchange (2/15/2008 4:55:47 AM)
|
Wow couldn't even wait 12 hours! Way to go man..[&o] There is absolutely no need to bump a post for a solid 24 hours and even then, if it hasn't fallen off the first page, it isn't necessary regardless of how impatient you are.
Might get more of a response in the proper section...
*Moving to Performance & Brainstorming - Engine & Internal*
As far as I know, there shouldn't be too much of a difference besides the possibility of a connector or two and the lengths of harness concerning the routing in the engine bay (not necessarily on the engine). Even at that, if a connector is different somewhere, you should be able to use the old sensor Some wires may need extending and some connectors may need to be changed, but that shouldn't be a reason to up and swap a whole harness for a different model. That could open up a whole other rats nest of problems. I would start with what you know works and build off of it.
Would be simple to just go to a junkyard and compare if you really needed to find out for yourself...
|
|
|
|
