2005 Trailblazer Wiper Question

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

2005 Trailblazer Wiper Question

Printable Version

Blazer Forum >> Mechanical & Maintenance >> General Tech Help >> GMT 360/370 Tech >> 2005 Trailblazer Wiper Question

Page: [1]

Message

<< Older Topic Newer Topic >>

2005 Trailblazer Wiper Question - 2/16/2008 10:32:42 PM

j2m1h

Posts: 1
Joined: 2/16/2008
Status: offline

My wipers only work on high, I have read online that some of the older models that had problems could be fixed by doing some cold soldering on the wiper motor module. Could this be the case for the 2005 also? Any advice would be appreciated I'm not a mechanically inclined person.

Post #: 1

RE: 2005 Trailblazer Wiper Question - 2/16/2008 10:44:15 PM

Chevy Lover

General Tech Moderator
Posts: 3411
Joined: 6/11/2006
From: Vancouver. B.C. Canada
Status: offline

swartlkk did a write up on the cold solder repair in a previous post. I found this using the "search" feature at the top of the page.
http://www.blazerforum.com/m_56980/tm.htm

_____________________________

Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time

(in reply to j2m1h)

Post #: 2

RE: 2005 Trailblazer Wiper Question - 2/17/2008 5:34:59 AM

swartlkk

Posts: 14530
Joined: 5/1/2005
From: Waterloo, NY
Status: online

*Moving to GMT360/370 Tech*

I'll have a look at the wiper motor in my Rainier to see what is different from my writeup.

*EDIT*

The wiper motor is located under the cowl cover. The wiper arms must be removed first, then the cowl cover, then the wiper arm assembly can be removed. Then the link posted above will then be applicable. Things will look a bit different though.

< Message edited by swartlkk -- 2/17/2008 6:37:40 AM >

_____________________________

Kyle-