cheroke single axel swap in a 93 blazer, need help (Full Version)

Blazer >> Modifications >> Suspension Tech

cheroke single axel swap in a 93 blazer, need help

  

gov1911 -> cheroke single axel swap in a 93 blazer, need help (3/8/2008 9:15:43 PM)

hello,
i am looking to put a cherokee front axel in a 93 blazer. i figure i will make all the brakets from control arm brackets to coil spring mounts. the only real thing that is bothering me is that the rear end ratio's are different and that it will blow up upon using it. anyone have any idea on possibly looking for pre-made brackets or if the rear end ratio's will match.

i looked at the lift list and found the kit that a company offers but they give you no info.


any info back is appreciated.

  
prozach1988 -> RE: cheroke single axel swap in a 93 blazer, need help (3/9/2008 5:59:04 AM)

the thing is i think the bolt patterns are different from our trucks to the jeeps so then you would end up with two differnt bolt patterns front to back

95BlazerLt4wd -> RE: cheroke single axel swap in a 93 blazer, need help (3/9/2008 6:47:51 AM)

not trying to steer you away from here because this is a great site, but if you sign up on S10forum.com, then go to the Liftin It section, there is several threads going on right now on solid axle swaps which will give you alot of information.

WolfPack -> RE: cheroke single axel swap in a 93 blazer, need help (3/9/2008 10:32:02 AM)

Try posting the links to the specific threads instead of directing him to sign up at a different site [:)]  I wanna see some stuff but don't wanna add another forum to my list

95BlazerLt4wd -> RE: cheroke single axel swap in a 93 blazer, need help (3/9/2008 12:50:50 PM)

http://www.s10forum.com/forum/f134/project-1995-s10-sas-339311/

http://www.s10forum.com/forum/f134/89-sfa-buildup-for-rocks-325756/

http://www.s10forum.com/forum/f134/project-fix-to-busted-cv-shafts-and-wheel-bearings-56k-no-no-329989/

here you are.

texastrails -> RE: cheroke single axel swap in a 93 blazer, need help (3/11/2008 1:47:24 AM)

if youre, really considering the time to oust the IFS, then you should replace the rear as well. The bolt patterns will be different, as i think the S-series are what 6x4.5 and the jeep is 5x4.5. The D30 isnt even really worth the time to chop all the IFS out and mock up a new solid front suspension. If anything i would at least move up to a D44. If you do continue to keep the 30, you could always grab a rear 8.8 out of a ford explorer. a lot of the them came with limited slips in the rear and also disc brakes so you wont be losing your 4 wheel discs. Also if you wanted to keep your rear 10 bolt you could always just buy wheel adapters for the D30 or the rear, although they arent very reliable in off camber situations. Also new front driveshaft, whole new world of steering components, i could go on and on and on. If its your DD, not worth it. unless you got cash to blow.

TripleBlackBlazer -> RE: cheroke single axel swap in a 93 blazer, need help (3/11/2008 1:51:26 AM)

6x4.5?  They're 5x4.75 but your point remains.  It's hard to rotate tires when you have different bolt patterns from front to back.

texastrails -> RE: cheroke single axel swap in a 93 blazer, need help (3/12/2008 1:04:31 AM)

lol yea sorry wasnt really sure bout the bolt patterns on the S-series anymore, lost my suspension before i even bought new tires for it while it was stock

  

Page: [1]

Return to Blazer Forum home page or view the Full Version of this page.