|
swartlkk -> RE: 1989 Chevy 350 (3/11/2008 8:27:08 PM)
|
Since you will already be putting on a different intake manifold to go back to carb'd (assuming it is TBI now), why not go through the whole motor. At the least, I would upgrade the cam before dropping it in. You are probably looking at an 8.5:1 compression ratio motor which has a power output of 220-240HP. Going from your engine to this would be a big jump stock to stock, but you can do better with a different cam, induction setup (intake & 4brl carb) and a good exhaust system.
The compression ratio begs for forced induction (supercharger, centrifugal supercharger, or turbo)!
|
|
|
|
