supercharger for old blazer
Login  | |
|
supercharger for old blazer - 2/6/2006 4:46:22 AM
|
|
|
psyco1887
Posts: 22
Joined: 12/30/2005
Status: offline
|
i have a 1992 and a 1994 s-10 blazer 4.3 engine. the 94 is a vortec and the 92 is the regular 4.3
and i can't find a supercharger or a turbocharcher for either.
i figured i could take one off a typhoon but i can't find one of them either.
anyone know a place?
_____________________________
1992 s-10 blazer
4wd 4.3 liter. v6 model 220 tbi
4 door.
4 speed automatic.
700-r4
also vortec v6
|
|
|
|
|
|
|
RE: supercharger for old blazer - 2/6/2006 10:14:32 PM
|
|
|
Bgray
Posts: 64
Joined: 1/15/2006
Status: offline
|
Whipple use to make a huffer for the TBI 4.3...try them
_____________________________
2005 Blazer. 5 speed..Stock Mommy Mover . Some Crap on it.
Custom comes One cut at a Time, Not in a Box.
|
|
|
|
|
RE: supercharger for old blazer - 2/6/2006 10:49:04 PM
|
|
|
swartlkk
Posts: 15304
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
|
Pretty much anything forced induction would have to be custom. The easiest course would be to get a procharger (Centrifugal S/C) and just have custom mounting plates made up (or possibly use a mounting kit for a 350sb), but you'd need to go with their smallest unit and then you'd probably have to put on a larger pulley to make it turn slower due to the lower displacement.
The problem with both a turbo or CSC is that the bottom end should really be upgraded. At the very least, some 8.5:1 pistons should be tossed in to keep from getting very harmful detonation due to excessive pre-ignition cylinder temps. High temps can be over come with an intercooler for both cases, but the CSC may be able to run without an intercooler with lower compression pistons. The CSC would require less custom fab than the turbo (collector pipes, down tubes, intake piping, intercooler piping, etc).
Either option is a daunting task to say the least! Good luck!
_____________________________
Kyle-
My Restoration Projects
Please Do Not PM for Tech Help
|
|
|
|
|
|
|
RE: supercharger for old blazer - 2/8/2006 2:01:53 AM
|
|
|
psyco1887
Posts: 22
Joined: 12/30/2005
Status: offline
|
i was already planning on upgrading to forged pistons.
but i am also having a little bit of trouble finding a vendor for the pistons too.
i can only find parts for imports.
and all the domestic websites i have seen have been in sets of 8 only.
< Message edited by psyco1887 -- 2/8/2006 2:05:40 AM >
_____________________________
1992 s-10 blazer
4wd 4.3 liter. v6 model 220 tbi
4 door.
4 speed automatic.
700-r4
also vortec v6
|
|
|
|
|
RE: supercharger for old blazer - 2/8/2006 4:11:06 PM
|
|
|
RedBlaze
Posts: 181
Joined: 7/29/2005
From: Atlantic, NC (eastside whats crack-a-lackin!)
Status: offline
|
Is the 94 a CPI?? if so they do not make any supercharges or turbocharges for that motor
_____________________________
'00 Chevy Blazer, Red, 2door, 4x4, Auto
|
|
|
|
|
RE: supercharger for old blazer - 2/9/2006 1:14:32 AM
|
|
|
psyco1887
Posts: 22
Joined: 12/30/2005
Status: offline
|
the 94 is a central multi port fuel injected vortec
_____________________________
1992 s-10 blazer
4wd 4.3 liter. v6 model 220 tbi
4 door.
4 speed automatic.
700-r4
also vortec v6
|
|
|
|
|
RE: supercharger for old blazer - 2/9/2006 11:09:03 AM
|
|
|
RedBlaze
Posts: 181
Joined: 7/29/2005
From: Atlantic, NC (eastside whats crack-a-lackin!)
Status: offline
|
Yeah I used to have one of those motors myself. They do not make a supercharger or turbocharger for that motor.
_____________________________
'00 Chevy Blazer, Red, 2door, 4x4, Auto
|
|
|
|
 Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Blazer Prices
Chevy Blazer
Trailblazer SS
Advertising Info
|
Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|
Printable Version
