Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

will a shift kit help?

  Printable Version
Blazer >> Mechanical & Maintenance >> Engine & Transmission >> will a shift kit help? Page: [1]
Login
Message << Older Topic   Newer Topic >>
will a shift kit help? - 3/14/2008 4:11:34 AM   
firemansc32


Posts: 202
Joined: 1/27/2008
Status: offline
My trans slips in second gear under hard accelration but not at all under normal driving.  Would a shift kit slow the demise of the second gear clutches or do nothing at all.  I could afford the shift kit but not even come close to a rebuild.


_____________________________

Adam-
_______________________________________________
2000 2dr. ZR2

www.freewebs.com/blazersofwisconsinarea
Post #: 1
RE: will a shift kit help? - 3/14/2008 9:39:56 PM   
Chevy Lover


General Tech Moderator
Posts: 3411
Joined: 6/11/2006
From: Vancouver. B.C. Canada
Status: offline
Chevy Lover's photo gallery
I rather doubt that it would help now if it's already slipping. If you had it installed before the wear occured it could have been worth the money.

_____________________________


Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time

(in reply to firemansc32)
Post #: 2
RE: will a shift kit help? - 3/14/2008 11:31:15 PM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: online
WolfPack's photo gallery
Oh!  You've piqued my interest sir.   What all is involved with these shift kits...and how do they work exactly?


_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to Chevy Lover)
Post #: 3
RE: will a shift kit help? - 3/15/2008 6:18:24 AM   
swartlkk


Posts: 15304
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
swartlkk's photo gallery
A shift kit is basically a hydraulic reprogramming of the transmission for quicker, firmer shifts.  When done to a healthy transmission, it will prolong its life.  Most of the heat and wear generated inside the actual transmission (torque converter aside) comes from the slipping that occurs during a shift.

If you do not mind having shifts that may be classified as harsh to neck snapping (depending on the shift kit setting you choose), a shift kit is for you!


_____________________________

Kyle-

My Restoration Projects
Please Do Not PM for Tech Help

(in reply to WolfPack)
Post #: 4
RE: will a shift kit help? - 3/15/2008 10:59:12 AM   
Chevy Lover


General Tech Moderator
Posts: 3411
Joined: 6/11/2006
From: Vancouver. B.C. Canada
Status: offline
Chevy Lover's photo gallery
^^^ As Kyle says, it's basically a hydraulic reprogramming. This involves pulling the pan, dropping the valve body, changing a few check balls to alter pressures.
I have a shift kit in my '90 and it has a head snapping shift. I like it, but I don't take my 82 year old dad out in this truck.

_____________________________


Give a man a fish and he will eat for a day, teach a man to fish, and he will sit on a boat drinking beer for a life time

(in reply to swartlkk)
Post #: 5
RE: will a shift kit help? - 3/15/2008 11:43:36 AM   
4x4blazerguy


Posts: 194
Joined: 3/9/2008
From: EXIT 105
Status: offline
4x4blazerguy's photo gallery
I agree with those that feel a shift kit improves transmission performance on a health tranny. But once a tranny starts slipping the best is to take it in for repair before you cause MAJOR DAMAGE. Personally, anytime I have to rebuild a tranny for myself a shift kit is a must. The other improvement that isn't talked about much is a performance torque converter, like HUGHES or B&M. For standard use & off-road I like the towing converters made by HUGHES PERFORMANCE out of Phoenix. They reduce converter slippage, which in turn adds to torque & less heat. Also another help for healthy tranny's is LubeGard ATF Additive. It cuts heat according to many tranny guys I talk to. Many tranny shops recommend it & or add it to their rebuilts.

< Message edited by 4x4blazerguy -- 3/15/2008 11:50:54 AM >

(in reply to Chevy Lover)
Post #: 6
RE: will a shift kit help? - 3/15/2008 11:33:55 PM   
firemansc32


Posts: 202
Joined: 1/27/2008
Status: offline
Well then does anybody have a guess as to what a rebuild would cost me.


I though about this but it is a little overkill.  http://www.bmracing.com/index.php?id=products&sid=3&cat=4&subcat=19


_____________________________

Adam-
_______________________________________________
2000 2dr. ZR2

www.freewebs.com/blazersofwisconsinarea

(in reply to 4x4blazerguy)
Post #: 7
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Blazer Forum >> Mechanical & Maintenance >> Engine & Transmission
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk15304
drperry3927
hanr33523
chevy lover3411
m00nwater3269
eurogoldls3121
wolfpack3074
paddle_grl2953
hillbillyino2887
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.