Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

look what I bought.

  Printable Version
Blazer >> Modifications >> Tires and Wheels >> look what I bought. Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
look what I bought. - 3/14/2008 4:22:12 PM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
bought these off a local guy from a classified site. came off a 1996 s10 pickup. paid $160 and got the rims, centrecaps and plastic lugnut caps, just need to buy the special lugnut. Is there a metal lugnut I can buy so I dont have to use the gay black caps.

these rims came from a 2wd truck so i'm pretty pumped that they'll stick out a couple inches over the stock ones from mine. Now I just need to get my dad to switch the rubbers over from mine.



finally get to ditch my ugly as* rims.
Might have to debadge my truck now since the centre caps have bowties on em, lol.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)
Post #: 1
RE: look what I bought. - 3/14/2008 4:27:43 PM   
garry2000blazer

 

Posts: 125
Joined: 2/28/2007
From: Huntsville, AL
Status: offline
Maybe fill in the bow tie and paint the caps to to match the truck??????

_____________________________

2000 LT 4x4
'81 Harley Sturgis Lowrider

(in reply to cliro)
Post #: 2
RE: look what I bought. - 3/14/2008 4:44:50 PM   
willjones


Posts: 643
Joined: 10/12/2007
From: Wilmington, NC
Status: offline
willjones's photo gallery
It will still have a Jimmy front end. And who cares if they have a bowtie on them, they look better and thats all that matter right?

_____________________________


(in reply to garry2000blazer)
Post #: 3
RE: look what I bought. - 3/14/2008 5:46:44 PM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
you bet. does anybody else have 2wd rims, if so do you have any pictures of the difference that they stick out, i'm kinda curious to see what kinda change i'm looking at.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to willjones)
Post #: 4
RE: look what I bought. - 3/14/2008 7:58:26 PM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
2wd are 4'' right?  I'm running with 4.5''..so it's close

not precise though


_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to cliro)
Post #: 5
RE: look what I bought. - 3/14/2008 8:05:01 PM   
swartlkk


Posts: 15304
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
swartlkk's photo gallery
Good for you man!

Its just my opinion, but I like your stock rims better, but it is your truck!  It'll look good either way!


_____________________________

Kyle-

My Restoration Projects
Please Do Not PM for Tech Help

(in reply to WolfPack)
Post #: 6
RE: look what I bought. - 3/15/2008 9:49:34 AM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
looking for pics with a stock size tire (235/75/15) on 2wd rims, setup on 4x4 for comparison.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to swartlkk)
Post #: 7
RE: look what I bought. - 3/15/2008 11:00:01 AM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
Well yea I meant in my gallery I've got 235s on the 4.5.  But no 2wd of course.  I'll do some lookin for ya though, there's gotta be someone on here that does!

_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to cliro)
Post #: 8
RE: look what I bought. - 3/15/2008 11:38:26 AM   
Hanr3


Wheels & Tire Moderator
Posts: 3523
Joined: 5/11/2005
Status: offline
Hanr3's photo gallery
Here you go.
The first two pics are 2wdr rims and stock sized tires. With that set up we rubbed like 31" tiures do on stock 4x4 rims on a stock 4x4. 

The next three pics are 4x4 rims on with stock tires.  


Thumbnail Image



Thumbnail Image



Thumbnail Image



Thumbnail Image



Thumbnail Image


Attachment (5)

_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to cliro)
Post #: 9
RE: look what I bought. - 3/15/2008 11:43:22 AM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
i shouldn't have any rubbing issues with the 235/75/15's right.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to Hanr3)
Post #: 10
RE: look what I bought. - 3/15/2008 11:50:58 AM   
Hanr3


Wheels & Tire Moderator
Posts: 3523
Joined: 5/11/2005
Status: offline
Hanr3's photo gallery
If you are running 4x4 rims with stock tires on a 4x4, no rubbing.
If you are running 2wdr rims with stock tires on a 4x4 you will have rubbing.

Notice how the metal splash guards aren't on the front tires? They used to be until the 2wdr rims ripped them off. 2wdr rims with stock tires on a 4x4 rig will rub the back of the front fender well. This is not a maybe, or it could, it WILL rub, and it rubs on the bolts holding the inner fender in place.

I guess its too late for you to buy other rims. There are some things you can do.
Beat the fender well back with a 10 pound sledge hammer so it doesn't rub.
Install a 2" body lift.
Rip the bolts out and not worry about it.
or crank teh torsion bars, although that is no garantee it wont rub while flexing on corners and driveways.




< Message edited by Hanr3 -- 3/15/2008 12:03:49 PM >


_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to cliro)
Post #: 11
RE: look what I bought. - 3/15/2008 11:57:49 AM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
well thats no good, so in stock form i can't use these rims. damn.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to Hanr3)
Post #: 12
RE: look what I bought. - 3/15/2008 12:00:53 PM   
Hanr3


Wheels & Tire Moderator
Posts: 3523
Joined: 5/11/2005
Status: offline
Hanr3's photo gallery
You can try it and see how you like it.
I bet your going to lose your splash gaurds and you will need to remove your inner fender bolts. You'll figure out which ones pretty quick.

_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to cliro)
Post #: 13
RE: look what I bought. - 3/15/2008 3:36:22 PM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
Granted my 235/75s were quite low on tread when I got the 4.5'' backspaced rims, but I had no rubbing whatsoever.  Not bumps, full lock, etc.  Would the 15/32nds or whatever the difference in tread depth makes to the diameter of the tire rub that much?

I had the problems you mentioned when I got the 265s, but 235/75 was fine for me..no t-bar, nothin.


_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to Hanr3)
Post #: 14
RE: look what I bought. - 3/15/2008 5:13:41 PM   
blazinloud


Posts: 2467
Joined: 2/8/2006
From: Saskatoon, Canada
Status: offline
I also like your stock rims better.....wanna sell em?

_____________________________



(in reply to WolfPack)
Post #: 15
RE: look what I bought. - 3/15/2008 8:00:58 PM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
wolfpack. What are you using for lift, just torsion bars and shackles, i'm thinkin your tires. stick out quite a bit more because of the wider tire you are using.

blazinloud. I'll probably keep them, besides they are curb rashed pretty good from the previous owner.

i've searched all over the internet for pics and i can't find anything........

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to blazinloud)
Post #: 16
RE: look what I bought. - 3/15/2008 8:32:21 PM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
They do stick out quite a bit more.  They are 10.5s!  And I just have the t-bars up 1'' or so to make it level.  They were sagging pretty hard with the weight of my brush guard, and even before the guard I had a good deal of rake. 

235/75s on 4.5'' BS looks like:



_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to cliro)
Post #: 17
RE: look what I bought. - 3/15/2008 9:59:21 PM   
cliro


Posts: 1209
Joined: 10/11/2007
From: Calgary, AB
Status: offline
cliro's photo gallery
can you maybe get a pic of your wheel well with the tires cranked over so i can see how much room there will be between the tire and inner fender.

_____________________________

2004 GMC Jimmy
4x4, 2dr.
metallic cherry red.



.net instead of .com (better)

(in reply to WolfPack)
Post #: 18
RE: look what I bought. - 3/15/2008 11:17:44 PM   
thegr81


Posts: 2639
Joined: 1/16/2007
From: PHOENIX,AZ
Status: offline
thegr81's photo gallery
Those rims will look good on your rig!! Congrats on getting them!!

_____________________________

2001 2wd 4.3 vortec v6
"I'm not fat, I'm a minitrucker"


(in reply to cliro)
Post #: 19
Hello I am new here - 3/16/2008 4:27:21 AM   
BLAZER LT

 

Posts: 2
Joined: 3/16/2008
Status: offline
I just bought a chevrolet Blazer LT 2000 and I have a problem. There is always a lamp on which is write 4WD. I think I have a problem with my transfert case? I don't know. Is there anyone can help me thank you 

(in reply to thegr81)
Post #: 20
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2   next >   >>

 
Blazer Forums >> Modifications >> Tires and Wheels
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk15304
drperry3927
hanr33523
chevy lover3411
m00nwater3269
eurogoldls3121
wolfpack3074
paddle_grl2953
hillbillyino2887
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.