Need a rear end yoke

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

Need a rear end yoke

Printable Version

Blazer >> Chevy Blazer Classifieds >> Private 'Wanted' Classifieds >> Need a rear end yoke

Page: [1]

Message

<< Older Topic Newer Topic >>

Need a rear end yoke - 3/18/2008 5:42:28 PM

shadowvnt

Posts: 9
Joined: 3/18/2008
Status: offline

I've got a 85 Blazer full size. That I'm getting from my bro-in-law. He broke the rear drive shaft a while back and in the process tore the rear end yoke up. Here's the kicker he has misplaced the old tore up yoke. He took it to a place to order a new one and left it with them. He then ...uh... had some issues and never went back to get the new one or the old one. The blazer has a 305 with a 4spd trans. I remember that the old yoke had the little teeth on it were the u-joints sit. I have no other measurements yet. Any one have anything like this??

_____________________________

Charlie Ward
Big Lake MN

Post #: 1

Updated with info need a rear end yoke - 3/19/2008 6:50:13 PM

shadowvnt

Posts: 9
Joined: 3/18/2008
Status: offline

Okay I got some much needed info today! I found one at the salvage yard I work at that would work except the cut out where the u-joint caps ride is a a little too small. I need a yoke with 30 splines with a 3 3/4" seal cover/ tin thing. about 3 15/16" wide from u-joint cut out to cutout. The u-joint "cups" on my rear axle are 1 1/4" diameter. I would also need the "straps" and bolts that would hold the driveshaft to the yoke. Any one have one???

Thanks in advance!

_____________________________

Charlie Ward
Big Lake MN

(in reply to shadowvnt)

Post #: 2