Torsion Bar "Mounts".. .Can't Find them for a '98???

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

Torsion Bar "Mounts".. .Can't Find them for a '98???

Printable Version

Blazer Forum >> Mechanical & Maintenance >> Steering, Suspension & Drivetrain >> Torsion Bar "Mounts".. .Can't Find them for a '98???

Page: [1]

Message

<< Older Topic Newer Topic >>

Torsion Bar "Mounts".. .Can't Find them for a... - 3/20/2008 1:40:28 PM

98BlazerLT4x4

Posts: 33
Joined: 3/1/2008
Status: offline

When searching I can find those that look like boxes with two holes on each end and a stud in the middle but where can I find the ones that look like a sway bar end link? I figured I would toss some new ones on since my torsion bars are out but I got sent the wrong piece (the box looking kind).

Thanks..

Post #: 1

RE: Torsion Bar "Mounts".. .Can't Find them f... - 3/22/2008 8:11:14 AM

98BlazerLT4x4

Posts: 33
Joined: 3/1/2008
Status: offline

Well they called links and are no longer made by gm according to the parts guy.

(in reply to 98BlazerLT4x4)

Post #: 2

RE: Torsion Bar "Mounts".. .Can't Find them f... - 3/22/2008 8:41:56 AM

Dturner14

Posts: 67
Joined: 6/20/2007
Status: offline

I think also that the mounts you are looking for doesn't fit the 1998 blazers. should be only for 1st generation models see if this is what your talking about? http://inpcars.com/torsion-bar-mount-kits1/

_____________________________

"Don''t Bring It.... If You Can''t Sling It!"- DirtyDogPark.com

1989 Chevy S10 Blazer 4x4, 2DR 4.3L

(in reply to 98BlazerLT4x4)

Post #: 3

RE: Torsion Bar "Mounts".. .Can't Find them f... - 3/22/2008 12:28:59 PM

98BlazerLT4x4

Posts: 33
Joined: 3/1/2008
Status: offline

That last one listed looks like it, just a beefed up version. The link has no longer available though, bu now I have a part #. I'm actually going to measure the holes and see if I can buy a bushing separately from http://www.energysuspension.com/pages/univ1.html

Edit: upon closer inspection that's not it. One side has a stud the other side a loop.

< Message edited by 98BlazerLT4x4 -- 3/23/2008 7:30:21 AM >

(in reply to Dturner14)

Post #: 4

RE: Torsion Bar "Mounts".. .Can''t Find them ... - 10/28/2008 6:18:03 AM

Naleshniki

Posts: 1
Joined: 2/17/2008
Status: offline

Hey! 98Blazer! Did you get anywhere with your torsion bar "link" search??? It''s amazing that so many sources show the WRONG torsion bar mounts; I even had to write AllData; they sent me the correct manual pages. But no one has these!