Electronic 4X4 Button

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

Electronic 4X4 Button

Printable Version

Blazer Forums >> Mechanical & Maintenance >> General Tech Help >> 1st Gen S-series (1983-1994) Tech >> Electronic 4X4 Button

Page: [1]

Message

<< Older Topic Newer Topic >>

Electronic 4X4 Button - 3/26/2008 11:39:06 AM

Vette Guy

Posts: 2
Joined: 3/26/2008
Status: offline

Hi I'm new here. I just got a 1993 S-10 blazer, 4.3L. There is no book with the truck and I was wondering if someone could help me get it back into 2 wheel drive. Its now in 4LO and there is just a spring loaded rocker switch on the dash that says 4HI or 4LO but nothing on the switch says 2 wheel drive. Thanks for any help. I am sure I will be back with more questions.

Post #: 1

RE: Electronic 4X4 Button - 3/26/2008 7:09:12 PM

Thor_449

Posts: 229
Joined: 3/24/2008
From: Plymouth, Indiana
Status: offline

first you must put it back into 4hi do this by pushing the 4hi button (it should glow green if it engaged) next to put it back into 2 wheel drive simple push the 4hi button agian the green light should go off and you should hear a clicking as it works

second if the light flashes at you that means it hasnt engaged and will abourt trying to engage after 30 sec so make sure your not in 2wheel drive now and think you are in 4LO. i had that problem and ended up getting stuck in a snow drift

(in reply to Vette Guy)

Post #: 2

RE: Electronic 4X4 Button - 3/27/2008 1:58:14 AM

drperry