Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

lifts with 265/75/16's

  Printable Version
Blazer >> Modifications >> Suspension Tech >> Lifting Tech >> lifts with 265/75/16's Page: [1]
Login
Message << Older Topic   Newer Topic >>
lifts with 265/75/16's - 3/31/2008 6:24:29 PM   
cowboy717

 

Posts: 14
Joined: 2/23/2007
Status: offline
anyone got any pix of a blazer with a lift that will fit 265/75/16s??? wonderin if a torsion bar crank and an addaleaf will work? or maybe the 2" lift from rough country?
thanks
Post #: 1
RE: lifts with 265/75/16's - 4/1/2008 11:24:24 AM   
jphayes921

 

Posts: 105
Joined: 8/19/2007
Status: offline
jphayes921's photo gallery
I got tbar and shackles I am planning on doing a 2" body lift with 265/75/16. they are supposed to be about equal to 31.5" diameter based on a tire size calc and convert.

_____________________________

2001 Trailblazer
1.5" T-Bar Crank
1.5" Shackles
30x9.5 Toyo Opencountry ATs
Pioneer head unit with two Rockford Fosgate P2 10''''s
G80 rear

(in reply to cowboy717)
Post #: 2
RE: lifts with 265/75/16's - 4/1/2008 11:34:29 AM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
The width won't be much of a problem.  The only issue is that a 265 tire (at least on my general grabbers) translates to actual width of 10.7 inches.  A 31x10.50 grabber is only 10.2'' wide.  So you might still have some rubbing issues at full-lock turn just from that extra width.  The height shouldn't be a problem with a 2'' BL or 2'' lift.  You might need 3'' though...2'' BL and 1'' shackle/t-bar.




_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to jphayes921)
Post #: 3
RE: lifts with 265/75/16's - 4/1/2008 11:49:03 AM   
jphayes921

 

Posts: 105
Joined: 8/19/2007
Status: offline
jphayes921's photo gallery
what about with a two wheel drive extreme wheels. they have a 4" bs and I believe are 8 or 9" wide?

_____________________________

2001 Trailblazer
1.5" T-Bar Crank
1.5" Shackles
30x9.5 Toyo Opencountry ATs
Pioneer head unit with two Rockford Fosgate P2 10''''s
G80 rear

(in reply to WolfPack)
Post #: 4
RE: lifts with 265/75/16's - 4/1/2008 1:33:24 PM   
WolfPack


Posts: 3074
Joined: 10/30/2007
From: Raleigh, NC
Status: offline
WolfPack's photo gallery
I've got 4.5'' backspace and 15x8s. I trimmed/lifted and still rub at full lock.  10.5s are prettttyyyy big.

4'' of backspace will cause you to rub more than me.  or you'll have to trim more than me.


< Message edited by WolfPack -- 4/1/2008 1:39:35 PM >


_____________________________



2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL

(in reply to jphayes921)
Post #: 5
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Blazer Forum >> Modifications >> Suspension Tech >> Lifting Tech
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk15304
drperry3927
hanr33523
chevy lover3411
m00nwater3269
eurogoldls3121
wolfpack3074
paddle_grl2953
hillbillyino2887
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.