lift opinions

Printable Version

Blazer Forum >> Modifications >> Suspension Tech >> Lifting Tech >> lift opinions

Page: [1]

Login Message << Older Topic   Newer Topic >>

lift opinions - 4/2/2008 8:03:45 PM    fst450   Posts: 28 Joined: 2/28/2008 Status: offline Just wondring if i could get some opinions on a control arm and coil lift. will the new control arms make it easyier on front end parts? or will it still be hard on everything the kit is from Spring tech says 2.5 or more lift from factory ride height Post #: 1

RE: lift opinions - 4/2/2008 8:21:40 PM    WolfPack Posts: 3074 Joined: 10/30/2007 From: Raleigh, NC Status: offline I take it you're planning on lifting your 2wd blazer? Assuming you do, it depends on the control arms.  If they are just elongated to give you a long travel kit, or if they are better angled to decrease wear.  Do you have a link to the kit? Edit: I think I found your kit...3'' UCA/Coil lift kit I would be a little cautious of these guys...they offer a 3'' kit for the 4x4s that is just new torsion keys/shackles...but anyone will tell you 2'' is the max for t-bars (max for any driveable 4x4) < Message edited by WolfPack -- 4/2/2008 9:48:24 PM > _____________________________ 2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL (in reply to fst450) Post #: 2

RE: lift opinions - 4/6/2008 10:37:24 AM    dubb_05 Posts: 33 Joined: 4/3/2008 From: Louisa, KY Status: offline i was kinda wondering about that too.. They say the most you can go (drivable) is 2" (pushing it)... But yet they make keys so you can go higher? (in reply to WolfPack) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 15304 drperry 3927 hanr3 3523 chevy lover 3411 m00nwater 3269 eurogoldls 3121 wolfpack 3074 paddle_grl 2953 hillbillyino 2887 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology