speedometer cabling

Printable Version

Blazer Forums >> Mechanical & Maintenance >> General Tech Help >> Full Size Tech >> speedometer cabling

Page: [1]

Login Message << Older Topic   Newer Topic >>

speedometer cabling - 4/17/2008 8:17:59 AM    Loofah   Posts: 21 Joined: 3/27/2008 Status: offline My speedometer doesn't work, I am going through the system in an attempt to find out why. Does anyone know where the speedometer cable gets it's signal from in the engine compartment (or wherever it may be). This is a 79 full size with an automatic transmission and no cruise control.  Post #: 1

RE: speedometer cabling - 4/20/2008 11:24:36 PM    BigBlack73   Posts: 43 Joined: 3/12/2008 Status: offline It's connects to the transfer case, not sure what side, assuming you have an NP203, it's on the right side facing the rear. the end of the cable has a kind of square part and a threaded cap that goes around it, which threads onto the spot on the transfer case. i have a 73 blazer with a similar problem, but my problem is that i put an NP205 in it and the spot where the speedo cable connects is on the other side, making my speedo cable to short :/ lol. i just gauge it by what gear i'm in and what RPM's i'm runnin at. hope i could help! _____________________________ 1973 K5 Blazer SB350 + 1405 Edelbrock SM465 + NP205 Inverted leaf springs on 4" blocks 38.5 Swampers (in reply to Loofah) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 14299 drperry 3896 hanr3 3476 chevy lover 3411 m00nwater 3269 eurogoldls 3121 paddle_grl 2942 hillbillyino 2884 wolfpack 2783 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology