Bagging a 4 door

Printable Version

Blazer Forum >> Modifications >> Suspension Tech >> Lowering Tech >> Bagging a 4 door

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

Bagging a 4 door - 4/19/2008 3:46:21 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline for those interested i will keep this thread updated with the bagging of the rear of my 4 door blazer the front is the same as any other s-series vehicle Basicly what i am doing is a forward facing 4 link and my rear floor is being rasied up enough for a body drop Next winter a SFBD will be done to my blazer I had to ditch the 4 door gas tank and sway bar.  I'm going with a 2 door gas tank and no sway bar. you could use a fuel cell if wanted. also my frame is being dehumped.  so the frame will be flat from front to back. All this work is being done by pyscho customs in Cranston RI  i'll have pics as soon as i can Heres my blazer before it went into the shop Post #: 1

RE: Bagging a 4 door - 4/19/2008 4:55:21 PM    thegr81 Posts: 2621 Joined: 1/16/2007 From: PHOENIX,AZ Status: offline Are you going to do a cantilever setup in the rear for lift??? Also i would suggest a watts link and then with your four link have them mount the bars under the axle for the forward bars therefore saving the rear floor as much as possible. That is what I am going to do to the rear of mine, just giving you a suggestion in case you want to save your floor in the rear. Also to keep in mind is that blazer's don't need a king kong notch either which alot of people think they need to do, the only reason for one is if your going 22's or bigger but in that case you can always do a underslung frame which will save your floor more then doing a huge notch. Just a few things for you in case you needed some extra info, but being a fellow minitrucker I am sure you allready have it all figured out!!! Good luck and I can't wait to see it layin frame!!! _____________________________ 2001 2wd 4.3 vortec v6 "I'm not fat, I'm a minitrucker" (in reply to packofqtips) Post #: 2

RE: Bagging a 4 door - 4/19/2008 5:46:20 PM    blazin97 Posts: 1665 Joined: 11/16/2004 Status: offline sounds sweet _____________________________ Chris 97 Blazer 2DR/2WD-down for some upgrades 97 Blazer 2DR/4WD/4.3/5Spd/31s/rusted (in reply to thegr81) Post #: 3

RE: Bagging a 4 door - 4/20/2008 7:56:50 AM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline already going with a small notch  and the floor is being raised up enough to clear my rims when i do a sfbd next winter  (in reply to blazin97) Post #: 4

RE: Bagging a 4 door - 4/29/2008 1:50:09 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline so no pics yet    but right now my frame has been cut straight and the 4 link is ready to be mocked up and installed tommorow  (in reply to packofqtips) Post #: 5

RE: Bagging a 4 door - 6/16/2008 4:28:29 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline its done!!!  driving it home tomorrow!!  so excited  i''ll get plenty of pics and stuff for the pic whores (in reply to packofqtips) Post #: 6

RE: Bagging a 4 door - 6/16/2008 4:32:58 PM    WolfPack Posts: 2783 Joined: 10/30/2007 From: Raleigh, NC Status: offline If the character limit lets you even post :( Lookin forward to it though! _____________________________ 2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL (in reply to packofqtips) Post #: 7

RE: Bagging a 4 door - 6/16/2008 4:37:56 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline what character limit? (in reply to WolfPack) Post #: 8

RE: Bagging a 4 door - 6/18/2008 7:08:58 PM    thegr81 Posts: 2621 Joined: 1/16/2007 From: PHOENIX,AZ Status: offline Where are the pics at??? I disappear for two months and there''s no new pics LOL!!! Can''t wait to see it man!! _____________________________ 2001 2wd 4.3 vortec v6 "I'm not fat, I'm a minitrucker" (in reply to packofqtips) Post #: 9

RE: Bagging a 4 door - 6/18/2008 9:13:05 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline (in reply to thegr81) Post #: 10

RE: Bagging a 4 door - 6/18/2008 9:15:05 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline it is done  i went to get it today and the switch box stopped working  so i had to order a new one  once i get that i''ll take it out and get some nice pics and i''ll try to take some of the underneath so you can see the 4 link and notch.  BTW it lays Dehumped frame  and it didnt cut into my floor space AT ALL (in reply to packofqtips) Post #: 11

RE: Bagging a 4 door - 9/24/2008 4:33:42 PM    95_4door Posts: 278 Joined: 9/16/2007 Status: offline Did you forget about us?  Where are the pictures at? I will be bagging my 4door soon, so I want to see what your setup looks like. Thanks _____________________________ Bill 1995 Chevy Blazer 4WD 4 Door (soon to be 2wd) Lifted Via Torsion Keys And Shackles (soon to be lowered) 31 x 10.5 Tires on Monte Carlo Rims (18" going back on soon) v8 Swap (in reply to packofqtips) Post #: 12

RE: Bagging a 4 door - 9/25/2008 11:19:52 AM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline (in reply to 95_4door) Post #: 13

RE: Bagging a 4 door - 9/25/2008 11:21:03 AM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline hmm  well looks like photobucket it being gay http://s78.photobucket.com/albums/j101/packofqtips/ i think its public (in reply to packofqtips) Post #: 14

RE: Bagging a 4 door - 9/25/2008 2:20:56 PM    blazin97 Posts: 1665 Joined: 11/16/2004 Status: offline looks pimp but still no int. pix _____________________________ Chris 97 Blazer 2DR/2WD-down for some upgrades 97 Blazer 2DR/4WD/4.3/5Spd/31s/rusted (in reply to packofqtips) Post #: 15

RE: Bagging a 4 door - 9/25/2008 4:05:48 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline the interior is actually stock  the notch didnt come through the floor i gotta clean the truck up for a show this weekend i''ll try to get some pics of the set up and under the truck (in reply to blazin97) Post #: 16

RE: Bagging a 4 door - 10/7/2008 8:32:53 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline istart of a small project im changing to slams and de-humping my control arms i''m bringing my camera so i''ll get pics of the underside (in reply to packofqtips) Post #: 17

RE: Bagging a 4 door - 10/7/2008 8:42:16 PM    WolfPack Posts: 2783 Joined: 10/30/2007 From: Raleigh, NC Status: offline woo! _____________________________ 2000 Blazer 4d LS 4x4 - 265/70/15 General Grabber AT2s - Hunter Brush Guard - Surco Roof Rack with IPF 868s - 1.5'' Shackle + Tbar - 2'' BL (in reply to packofqtips) Post #: 18

RE: Bagging a 4 door - 10/7/2008 8:44:01 PM    packofqtips   Posts: 148 Joined: 3/8/2008 Status: offline heres what it looks like right now (in reply to WolfPack) Post #: 19

RE: Bagging a 4 door - 10/8/2008 12:11:20 PM    blazin97 Posts: 1665 Joined: 11/16/2004 Status: offline what happened to the int. pix? looks pimpin layin low _____________________________ Chris 97 Blazer 2DR/2WD-down for some upgrades 97 Blazer 2DR/4WD/4.3/5Spd/31s/rusted (in reply to packofqtips) Post #: 20

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 14299 drperry 3896 hanr3 3476 chevy lover 3411 m00nwater 3269 eurogoldls 3121 paddle_grl 2942 hillbillyino 2884 wolfpack 2783 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology