Tintzorz + 130 SF LED's + 1st gen clears

Printable Version

Blazer Forum >> General >> General Chat >> Tintzorz + 130 SF LED's + 1st gen clears

Page: [1]

Login Message << Older Topic   Newer Topic >>

Tintzorz + 130 SF LED's + 1st gen clears - 4/20/2008 10:34:54 PM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline Oh man what a project.  I'll just post some pics. And a little vid _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto Post #: 1

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/20/2008 10:47:56 PM    drperry Posts: 3927 Joined: 1/12/2007 From: GP AB CA Status: offline Cool beans. Awesome work! _____________________________ (in reply to Blazin_Jason) Post #: 2

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/21/2008 12:41:39 AM    TripleBlackBlazer Site Moderator Posts: 2004 Joined: 2/13/2007 Status: offline Custom FTW! Interested to see how they hold up to weather and vibrations.  Gonna need a 6 month follow up, roger that? _____________________________ (in reply to drperry) Post #: 3

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/21/2008 8:07:07 AM    94blueknight Posts: 1520 Joined: 12/31/2007 From: Wisconsin Status: offline nice lil vid! r those even amber or yellow?? they dont really look like it in the vid. also the pics r nice lil red x's for me. but i can kinda tell from the vid that u smoked the turn signals plus from what u've been talkin. i was thinkin of getting the clear corner markers in the grill and slightly smoking them. what did u use to smoke ur lens'? i dont wanna go that dark tho. _____________________________ CHECK IT OUT its ME! (in reply to TripleBlackBlazer) Post #: 4

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/21/2008 8:49:13 AM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline They are "white" leds, but they have a slight blueish look to them.  I guess imageshack isn't working properly right now.  To tint them I used a candy charcoal automotive paint (multiple coats till it was dark enough), and 3 coats of clear over them.   _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto (in reply to 94blueknight) Post #: 5

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/21/2008 8:58:28 AM    94blueknight Posts: 1520 Joined: 12/31/2007 From: Wisconsin Status: offline ok. what kinda automotive paint did u use? theres a lot out there. _____________________________ CHECK IT OUT its ME! (in reply to Blazin_Jason) Post #: 6

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/21/2008 10:10:37 AM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline The pics might be working now.  I used Du Pont Hot Hues candy charcoal paint.  The paint/reducer/clear/activator/adhesion promoter was about $170.  Other people use a product by VHT Night Shades I believe.  Some people use model car spray paint tint, or other spray tints/stained glass colors.  I was trying to get something that would hold up well, and I hope it does for the price. _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto (in reply to 94blueknight) Post #: 7

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/22/2008 7:00:05 PM    neo71665 Posts: 335 Joined: 12/18/2007 From: rison AR Status: offline They turned out real well. Hope ya'lls cops are better than the ones we got. The ones we got around here will bust us quick for the smoke lens and not being yellow/amber light. < Message edited by neo71665 -- 4/22/2008 7:08:13 PM > _____________________________ 1987 s-10 blazer 4x4, 2.8, 700r4, np207, 3.73 gears with a few mods. (in reply to Blazin_Jason) Post #: 8

RE: Tintzorz + 130 SF LED's + 1st gen clears - 4/22/2008 8:07:23 PM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline The law here is either white/amber on the front of the vehicle.  I checked first to see if I had to keep them amber or not.  I have the motor vehicle standards act on that printed just in case. :P   _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto (in reply to neo71665) Post #: 9

RE: Tintzorz + 130 SF LED''s + 1st gen clears - 9/7/2008 9:09:25 AM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline Here is an update a little early.  Bumper lights are fine since they are being ran off a PWM, so that they have dual brightness for flashing.  The corner lights are facked.  I have about 1/2-3/4 of the led''s burned out.  Some that aren''t burned out a flickering.  They were fine for a few months but now they are dying.  I am running the LED''s at about 65-70mAh which is under the 100 they said they do.  So basically they look like ish and I need to redo them, which sucks.  I will be ordering some different and hopefully higher quality leds from best hong kong and running them at even lower current.  I did have one problem from the polizia when I went through a road block.  Long story short she said blue, I said white, I got VI, I pass VI, J$ out $100.  They must have been having a slow night cause I''ve passed many cops at night before and gone through other roadblocks.  Also I bought a bunch of LED''s for my blazer.  This time I am going with lumiled''s ambers for the lights and they aren''t going to be tinted, just clear.  They should be nice and bright.  Also got some reds coming to try out a tailight and see if I can get enough in there to make them bright enough.  _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto (in reply to Blazin_Jason) Post #: 10

RE: Tintzorz + 130 SF LED''''s + 1st gen clears - 9/7/2008 6:39:49 PM    neo71665 Posts: 335 Joined: 12/18/2007 From: rison AR Status: offline You running a voltage reg to them or just off of resistors? I''ve had problems in the past with just resistors but since I''ve started figuring them for 12 volts and running a 12 volt regulator it seems to have fixed the leds burning out. Sorry to hear about the pigs screwing with y,, lasted longer than they would have here tho. Just so you know its impossible to make pure true white light LEDs so they all are either a blueish (cool white) or yellowish (warm white). The warm white is supposed to look more light a normal light bulb but ugly as all hell. _____________________________ 1987 s-10 blazer 4x4, 2.8, 700r4, np207, 3.73 gears with a few mods. (in reply to Blazin_Jason) Post #: 11

RE: Tintzorz + 130 SF LED''''''''s + 1st gen clears - 9/7/2008 7:49:43 PM    Blazin_Jason Posts: 1101 Joined: 5/17/2006 From: Van Isl, B.C. Status: offline Ya I wish they made a white in between the 2.  These ones are about 8000k, I wish they had some like 5000k.  Yup I was running 9 volt regs and resistors, so both current and voltage regulation.  I guess they just can''t run what I had them at.  Now I find out that other people have had the same problem.  I guess they are just not that great.  I contacted the seller who I got them from just to let them know, but they never responded.   _____________________________ 85 S10 Blazer 4x4, 2 door, undergoing 350 swap, 3" BL, 33''''s 89 Jimmy 4x4, 2 door, 4.3/auto (in reply to neo71665) Post #: 12

RE: Tintzorz + 130 SF LED''''''''''''''''s + 1st gen cl... - 9/8/2008 5:58:55 AM    jimbosv650 Posts: 122 Joined: 3/21/2007 Status: offline DANG NICE! _____________________________ (in reply to Blazin_Jason) Post #: 13

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 15304 drperry 3927 hanr3 3523 chevy lover 3411 m00nwater 3269 eurogoldls 3121 wolfpack 3074 paddle_grl 2953 hillbillyino 2887 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology