|
Blazin_Jason -> RE: Tintzorz + 130 SF LED''s + 1st gen clears (9/7/2008 9:09:25 AM)
|
Here is an update a little early. Bumper lights are fine since they are being ran off a PWM, so that they have dual brightness for flashing. The corner lights are facked. I have about 1/2-3/4 of the led''s burned out. Some that aren''t burned out a flickering. They were fine for a few months but now they are dying. I am running the LED''s at about 65-70mAh which is under the 100 they said they do. So basically they look like ish and I need to redo them, which sucks. I will be ordering some different and hopefully higher quality leds from best hong kong and running them at even lower current.
I did have one problem from the polizia when I went through a road block. Long story short she said blue, I said white, I got VI, I pass VI, J$ out $100. They must have been having a slow night cause I''ve passed many cops at night before and gone through other roadblocks.
Also I bought a bunch of LED''s for my blazer. This time I am going with lumiled''s ambers for the lights and they aren''t going to be tinted, just clear. They should be nice and bright. Also got some reds coming to try out a tailight and see if I can get enough in there to make them bright enough.
|
|
|
|
