Parting out 95 4x4 4door blazer.
Login  | |
|
Parting out 95 4x4 4door blazer. - 5/13/2008 9:14:45 AM
|
|
|
Swiss
Posts: 24
Joined: 5/13/2008
Status: offline
|
Hi all. Just found this forum, and unfortunately I was rear ended hard, and it totalled my blazer. Apparently michigans "no fault" insurance means, your automobile will only get fixed/paid for by your own insurance company. Meaning, I got rear ended, I had PL/PD on my blazer, the other guy had full coverage, so by law I am entitled $500.00 only. Worst time for this to happen, so I am going to have to part everything out, hopefully can help some of you guys out.
Its a 4.3 vortec 1995 4x4 4 door blazer with 110k miles on it. Its dark green, not sure exact color on it.
Does not have mirrors, those were blown off when i got hit. Obviously no rear bumper. The glass is still in tact all the way around.
It is in good running condition, just paid quite a bit to get a lot of things done to it. Cleaned out the EGR valve (again) may have replaced it unsure, tune up (expensive as hell on this model)
Can email me for any questions at westwahomie@yahoo.com
Thank you
PS. I also have brand new visors for the windows, 2 for the front, 2 for the back, still in the plastic wrap, didn't have a chance to replace mine.
< Message edited by Swiss -- 5/13/2008 11:19:24 AM >
|
|
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/13/2008 11:05:25 AM
|
|
|
Sterling
Posts: 128
Joined: 3/4/2008
From: Tennessee
Status: offline
|
pics, and im interested in the front windshield wiper arms, and the a/c compressor with clutch.
it would all be shipped for 37135
_____________________________
1995 4dr 4x4 LS Blazer
Chrome Grille Guard, Custom Painted Dark Cherry Interior, Roof Cab Lights, Grille Inserts, 2.5" Magnaflow Hi-Flow Cat, 2.5" Piping All The Way Down, 2.5" Thrush Glasspack Muffler, Chrome Nerf Bars, 2 In. T-bar Crank, 31x10.5xR15
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/13/2008 11:11:17 AM
|
|
|
Swiss
Posts: 24
Joined: 5/13/2008
Status: offline
|
Alright, i'll try to get pics soon.
The wiper arms are definately good, wiper motor not so much. A/C Compressor is good, not sure about the clutch. I mean i get nice cold air etc, but im pretty sure the clutch on it is getting worn. IF that was the case, would you still be interested in the compressor?
If so, email me your offer without shipping (or with, just be specific)
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/13/2008 1:52:46 PM
|
|
|
972DRBLAZER
Posts: 445
Joined: 10/30/2007
From: polk, fl.
Status: offline
|
how is the front bumper? i am interested in the bumper and the drivers side bumper end. does the bumper have the trim on it? thank you.
_____________________________
97 BLAZER 4.3 2WD. HEADERS, CHERRY BOMB, 3.73 POSI, PORTED THROTTLE BODY, CAI, TBS, 3.5 MAF, ELECTRIC FANS, WAIT4ME TUNE, B&M STAGE 2 SHIFT KIT, HOLLEY IGNITION BOX & COIL, 160 THERMO, AND MORE.
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/13/2008 2:31:56 PM
|
|
|
Swiss
Posts: 24
Joined: 5/13/2008
Status: offline
|
As far as i know the front bumper is in good condition. The driver side front i believe is good, not sure about the back. Wasn't sure which part you wanted. And to those that have been interested, i may not be able to do any parts. I was planning to just take it apart part by part and sell all the parts. Now my dad is saying he might know someone that will buy it in its entirety. So if he isn't going to help me take it apart then i wont be able to, but i will be sure to keep you guys posted. Still feel free to inquire, i check my email many times in a day and will have a response same day.
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/13/2008 8:41:18 PM
|
|
|
sasquatchfound
Posts: 185
Joined: 5/28/2007
Status: offline
|
I'm interested in both front hub assembly's shipped to 54703
Thanks, Shane
_____________________________
any donor can be a father, but it takes a man to be a daddy.
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/26/2008 5:19:18 PM
|
|
|
Swiss
Posts: 24
Joined: 5/13/2008
Status: offline
|
Sasquatch, i pm'd you and you didn't reply. I wont be able to do the hubs for some time now, i gotta work my way to getting it parted out decently before i want to rely on sitting it on blocks.
Can email me to keep in touch better, westwahomie@yahoo.com
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/26/2008 5:20:23 PM
|
|
|
Swiss
Posts: 24
Joined: 5/13/2008
Status: offline
|
Hey there, Pretty sure the bumper is in good condition, and if your referring to the front bumper on the driver side end, then that one should be good too. email me and i will try to get you pics
westwahomie@yahoo.com
|
|
|
|
|
RE: Parting out 95 4x4 4door blazer. - 5/27/2008 9:30:27 AM
|
|
|
972DRBLAZER
Posts: 445
Joined: 10/30/2007
From: polk, fl.
Status: offline
|
i dont need the bumper anymore. you said that your dad might sell the whole truck, so i just got a bumper from some one else.
_____________________________
97 BLAZER 4.3 2WD. HEADERS, CHERRY BOMB, 3.73 POSI, PORTED THROTTLE BODY, CAI, TBS, 3.5 MAF, ELECTRIC FANS, WAIT4ME TUNE, B&M STAGE 2 SHIFT KIT, HOLLEY IGNITION BOX & COIL, 160 THERMO, AND MORE.
|
|
|
|
|
Printable Version
RE: Parting out 95 4x4 4door blazer. - 
