Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

I thought it was bad gas

  Printable Version
Blazer Forum >> Mechanical & Maintenance >> Engine & Transmission >> I thought it was bad gas Page: [1]
Login
Message << Older Topic   Newer Topic >>
I thought it was bad gas - 6/22/2008 6:58:39 PM   
eljefe83


Posts: 32
Joined: 4/1/2008
Status: offline
I''ve replaced the fuel pump/filter/pump relay/spark plugs/spark wires after my 89 4.3 4whl 208k died one day. The new pump-relay fixed the problem, but it got 5-6mpg afterwards and ran like crap (misfire or out of time). The new plugs made no difference. When I re-istalled the fuel pump I broke 3 out of the 4 plastic claps I had so I just didn''t put one on the short hose in the fuel tank (the hose pumping fuel to the engine). I don''t know if that''s my problem or if there is something I did that requires me to re-time the truck. Also what kind of wrench am I suppose to use to loosen the distributor bolt?

_____________________________

Jeff, 89 S10 Blazer, 2dr, 4x4 Project truck
Post #: 1
RE: I thought it was bad gas - 6/23/2008 12:38:23 PM   
Hanr3


Wheels & Tire Moderator
Posts: 3399
Joined: 5/11/2005
Status: offline
Hanr3's photo gallery
sure would help if you added to teh original thread, when you create a new thread we lose the history of information and have to start over. I rarely remember each and every members posts about the issues they are having and often reread the thread until I remember.

As for what you did post. Got gas in the oil?
If so you ay have the wrong FPR. When I replaced mine I got the wrong unit, it was in the right box, but it was the wrong unit. Exchanged it for the right one and that took care of that problem.

Do you ahve a CEL? If so, what is the code.

Sure you got he plug wires in the correct order?

_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to eljefe83)
Post #: 2
RE: I thought it was bad gas - 6/24/2008 10:01:34 PM   
eljefe83


Posts: 32
Joined: 4/1/2008
Status: offline
Yeah, I''m still new to forums, this is the first one I''ve belonged to and posted topics. I''ll remember your advice about including the original thread.

I''ll check for oil in the gas tommorow, there''s some white smoke when it starts and the exuast smells bad, almost rotten. I''m sure the firing order is right, I followed the instructions in the Chilton, but my dist doesn''t line up like the picture shows. I''m puzzled because it ran great before I replaced the pumpect. I''ll look into a different relay. Thanks.

_____________________________

Jeff, 89 S10 Blazer, 2dr, 4x4 Project truck

(in reply to Hanr3)
Post #: 3
RE: I thought it was bad gas - 6/28/2008 10:58:54 AM   
cvcmama22

 

Posts: 10
Joined: 3/12/2008
Status: offline
did u check your  valve springs    i had a similiar problem and it turned out to be a valve spring broke 

(in reply to eljefe83)
Post #: 4
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Blazer >> Mechanical & Maintenance >> Engine & Transmission
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk13651
drperry3891
chevy lover3411
hanr33399
m00nwater3269
eurogoldls3090
paddle_grl2936
hillbillyino2881
xblazer012659
thegr812621

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.