how to test transfer case vaccuum switch
Login | |
|
how to test transfer case vaccuum switch - 6/28/2008 8:15:46 PM
|
|
|
matclark
Posts: 18
Joined: 5/13/2008 Status: offline
|
how would you test the transfer case vaccuum switch on a 94 4.3 s-10 blazer ? i need to know,,on the switch itself,,, which one of the 3 comes from the engine,, and which 1 goes to front actuator,,and which 1 is the vent ? i read that you can put this vaccuum plug on wrong,,i have constant vaccuum at the frant axle actuator,,i was thinking the previous owner may have put it on wrong,,,,i bought my blazer from a total drunk,,and i dont have a clue at what all he has done. i have fixxed alot of stuff....i do have a hand operated vaccuum pump,,but i dont want to damage the vaccum switch.. please help !!!! Combining consecutive posts. Please use the edit function if another member has yet to reply. Thanks! TBB to simplify things...i need a break down of the transfer case vaccuum switch....which one of the 3 nipples does what?? And another... which 1 of the 3 nipples is the vent? the other 2 should be the vaccuum switch,from the engine to the front actuator...
< Message edited by TripleBlackBlazer -- 6/29/2008 1:58:00 PM >
|
|
|
|
|
|
|
|
Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|