Not Starting 95 4.3
Login | |
|
Not Starting 95 4.3 - 7/2/2008 5:30:02 PM
|
|
|
bob51
Posts: 4
Joined: 7/2/2008 Status: offline
|
I have a 95 Blazer with 4.3 with the CMFI injection. It will not start. It has good ignition. If I spray starting fluid in the intake plenum it will start and seems to run good while it is started. It had been giving an EGR code so I have replaced the EGR valve it seems to be unrelated. The fuel pump is running and delivering fuel. Although the pressure is at 40 psi, the book calls for 58 to 64 psi. I would assume this is the problem except when it is started it runs and accelerates fine. Where is the pressure regulator on this thing and is it replaced separately from the pump? Thank you for any ideas.
_____________________________
robert pfau
|
|
|
|
|
|
RE: Not Starting 95 4.3 - 7/2/2008 6:24:04 PM
|
|
|
rriddle3
Posts: 1228
Joined: 12/22/2006 From: Fort Worth,Texas Status: offline
|
to the Forum, Bob. We have plenty of threads here about the exact problem you describe. Have you used the ''search'' function or read through any of the postings? Give it a shot, and if you are still stumped, post back up and we''ll see what we can do.
_____________________________
2002 Blazer LS 4dr 2WD Auto Trans Hypertech PP III Programmed Flowmaster 50 Series Delta Flow Muffler, C6 Corvette Exhaust Tip TYC Elegante carbon fiber tail lights
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Blazer Prices
Chevy Blazer
Trailblazer SS
Advertising Info
|
Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|