window & door panel

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

window & door panel

Printable Version

Blazer >> Mechanical & Maintenance >> General Tech Help >> 2nd Gen (1995-2005) Tech >> window & door panel

Page: [1]

Message

<< Older Topic Newer Topic >>

window & door panel - 8/23/2008 6:19:44 AM

bamablazer57

Posts: 15
Joined: 4/14/2008
Status: offline

ok i drive a 2001 blazer ls 4.3. and when i got in it this morning to go to work i pulled on the door handle and the bottom half of the door broke. no biggy ima find another one 4 cheap hopefully but my real problem is my passenger side window won''t roll up and i can figure out why. i beleive something came unplugged cause its getting juice. when i roll up other windows if i press the button it slows down the speed of the other windows but it doesn''t even get a click or anything. pls help and thnks

Post #: 1

RE: window & door panel - 8/23/2008 6:43:02 AM

bjsx8f

Posts: 21
Joined: 8/22/2008
Status: offline

sounds like you have a window motor out..... if this is the case just simply have to drill out a few rivits then drill holes in the panel to run bolts through and fasten with a nut

(in reply to bamablazer57)

Post #: 2

RE: window & door panel - 8/23/2008 7:13:27 AM

swartlkk

Posts: 14314
Joined: 5/1/2005
From: Waterloo, NY
Status: online

If the window isn''t jammed, the motor is probably gone as stated above. Once you drill the rivets, the bolts will install in the holes the rivets were through.

_____________________________

Kyle-

2004 Rainier
1970 Chevelle - Resto
1974 K5 Blazer - Resto

(in reply to bjsx8f)

Post #: 3

RE: window & door panel - 8/23/2008 9:56:25 AM

bjsx8f

Posts: 21
Joined: 8/22/2008
Status: offline

yes the same holes sorry i didnt mean to drill all new holes but to increase the size of the original holes to fit a bolt through.

(in reply to swartlkk)

Post #: 4

RE: window & door panel - 8/23/2008 9:58:19 AM

dBsound

Posts: 104
Joined: 2/27/2007
From: Bloomington, IN
Status: offline

My driver''s window won''t always go up. I finally figured out that if I pry up the part of the door, that holds the window switches (that doing so apparently wiggles the offending wire), the window then goes back up.

It''s worth a try. There''s just a clip holding it in place. I think I pry backwards on it(just with my fingers), and it pops out. Window goes back up!

_____________________________

2001 Jimmy 4WD
1998 Jimmy Partsmobile!

(in reply to swartlkk)

Post #: 5