Nitrous Purge

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

Nitrous Purge

Printable Version

Blazer Forums >> Modifications >> Performance & Brainstorming >> Nitrous, Super Chargers, & Turbos >> Nitrous Purge

Page: [1]

Message

<< Older Topic Newer Topic >>

Nitrous Purge - 3/9/2006 3:57:52 AM

sonicdrft

Posts: 17
Joined: 2/25/2006
Status: offline

i was wandering if anyone knew of any cheap way to make ur own purge kit...

Post #: 1

RE: Nitrous Purge - 3/9/2006 10:01:59 AM

jagblazer01

Classifieds & A/V Moderator
Posts: 2207
Joined: 2/23/2006
Status: offline

i dunno if you can make your own. it would probably be easier to just buy the purge kit from zex or somewhere

_____________________________

2001 blazer 4wd 4.3L 4 door
Prestigious Innovations
www.prestigiousinnovations.com

(in reply to sonicdrft)

Post #: 2

RE: Nitrous Purge - 3/9/2006 8:56:09 PM

02 Vortech

Posts: 279
Joined: 12/11/2004
Status: offline

i use a dynotunenitrous.com purge kit its only $65 and works very well

_____________________________

CUSTOM REARMOUNT TURBO BLAZER - 11psi
8.36 @ 83m

(in reply to jagblazer01)

Post #: 3

RE: Nitrous Purge - 3/16/2006 10:29:40 AM

Patrick

Posts: 537
Joined: 3/17/2005
Status: offline

i wouldnt want a cheap purge kit...you could risk it leaking, or failing altogether and losing pressure...and i dont know about where you live, but where i live, it isnt cheap.

(in reply to 02 Vortech)

Post #: 4

RE: Nitrous Purge - 9/17/2006 2:35:57 PM

richlo

Posts: 8
Joined: 9/16/2006
Status: offline

very simple to make your own purge kit... just get a cheap nitrous solenoid, a T joint, and conect in that soenoid right before your actual nitrous soleniod, and just do the wiring to an arming switch and a push button. and rought the purge line (can be simple fuel line) wherever you want... under the hood shooting at the winshield, or under the fender shooting out, etc. if you find a cheap solenoid on ebay it can be done for as cheap as $25-30.

(in reply to sonicdrft)

Post #: 5