TQ converter?

Printable Version

Blazer Forums >> General >> General Chat >> TQ converter?

Page: [1]

Login Message << Older Topic   Newer Topic >>

TQ converter? - 9/30/2008 1:51:32 PM    97ssblazer   Posts: 84 Joined: 8/12/2008 Status: offline what STALL can i use? i have a jasper motor with an RV cam... it has a higher lift but same duration... i about to spend 3,000 on a custom built tranny... 3 year unlimited mile warranty so i was curious what converter to run? Post #: 1

RE: TQ converter? - 9/30/2008 2:01:20 PM    swartlkk Posts: 14472 Joined: 5/1/2005 From: Waterloo, NY Status: offline Really, I would say just stick with stock.  Unless your cam pushed the HP peak up higher in the RPM band and you have the PCM tuned to use it, you will see little to no benefit from raising the stall speed. _____________________________ Kyle- 2004 Rainier 1970 Chevelle - Resto 1974 K5 Blazer - Resto (in reply to 97ssblazer) Post #: 2

RE: TQ converter? - 9/30/2008 2:26:34 PM    bad350v8s10tahoe Posts: 207 Joined: 3/16/2008 Status: offline 2000 to 2200 stall with a stock to mild engine or you can ask for a RV torque converter _____________________________ GOT MUD? (in reply to swartlkk) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 14472 drperry 3901 hanr3 3479 chevy lover 3411 m00nwater 3269 eurogoldls 3121 paddle_grl 2944 hillbillyino 2884 wolfpack 2824 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology