1998 blazer 4.3L 4x4 to LT1
Login  | |
|
|
|
|
|
RE: 1998 blazer 4.3L 4x4 to LT1 - 3/6/2005 6:50:27 PM
|
|
|
01xtreme
Posts: 420
Joined: 8/15/2004
From: United States
Status: offline
|
Here's a site that I found a while back ago. Hope it helps you out.
http://www.blazerforum.com/m_315/tm.htm
_____________________________
Clear Turns, Euro Tails, Diamond Plate Floor Mats, Cold Air Intake, Billit Grille Emblem, Envoy Door Handles, Alpine CDA-9815, Two 12" Audiobahn Subs, 400 Watt Audiobahn Amp, Custom Made Box, Billit Headlight/HVAC Knobs
|
|
|
|
|
RE: 1998 blazer 4.3L 4x4 to LT1 - 3/7/2005 11:12:50 PM
|
|
|
jezter69
Posts: 2
Joined: 3/6/2005
Status: offline
|
well the transmission swap is kool but it still has nothing on a LT1 swap into a 4 door 4x4......
|
|
|
|
|
RE: 1998 blazer 4.3L 4x4 to LT1 - 3/7/2005 11:30:07 PM
|
|
|
01xtreme
Posts: 420
Joined: 8/15/2004
From: United States
Status: offline
|
When I read the article, I could have sworn that there was something in there about an engine swap out of a 1994 (I believe) corvette. I'm wanting to say that it was an LT1 engine although it could be a LT4 engine. It's been a while since I've read the article. Sorry I couldn't help you out much then.
_____________________________
Clear Turns, Euro Tails, Diamond Plate Floor Mats, Cold Air Intake, Billit Grille Emblem, Envoy Door Handles, Alpine CDA-9815, Two 12" Audiobahn Subs, 400 Watt Audiobahn Amp, Custom Made Box, Billit Headlight/HVAC Knobs
|
|
|
|
|
Printable Version
1998 blazer 4.3L 4x4 to LT1 - 
) anyways. I'm not happy with the low power in the 4.3 and was wanting to swap to a LT1 with a 700r trannie. is this posiable with keeping the 4x4? is there any sites that sell swap parts or can help? I have found tons of postings for 2x4 and i'm by far a chevy expert but found out that chevy is better to work on than a mustang. 
