Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

RE: 31/10.5/15 on stock blazer rim?

  Printable Version
Blazer Forum >> Modifications >> Tires and Wheels >> RE: 31/10.5/15 on stock blazer rim? Page: <<   < prev  1 [2]
Login
Message << Older Topic   Newer Topic >>
RE: 31/10.5/15 on stock blazer rim? - 9/6/2006 9:09:42 PM   
DetroitMuscle


Posts: 829
Joined: 2/22/2006
Status: offline
DetroitMuscle's photo gallery
quote:

ORIGINAL: Kellen

Bump!


I'm planning on buying wheels on saturday.

Is a 30/9.5 tire going to rub on a wheel with 4.5 inches of backspacing as opposed to the factory 6 inches?!?!?!





if 6" doesnt rub why would 4.5"? what offset negative or postive?

A 30x9.5/15 is the biggest tire you can fit on the dime with zero rub. increase the size increase the rub risk.

(in reply to Kellen)
Post #: 21
RE: 31/10.5/15 on stock blazer rim? - 9/6/2006 9:40:06 PM   
Kellen

 

Posts: 120
Joined: 7/21/2006
From: Woodstock, Ontario, Canada
Status: offline
less backspacing = wheel/tire sticks out more.

I'm worried about the front tire rubbing on the fender when I turn.

(in reply to DetroitMuscle)
Post #: 22
RE: 31/10.5/15 on stock blazer rim? - 9/7/2006 11:38:57 PM   
Hanr3


Wheels & Tire Moderator
Posts: 3476
Joined: 5/11/2005
Status: offline
Hanr3's photo gallery
Great post mdnky.

A 30" tire is only 1" bigger then stock 235/75R15 tires, thats a whole 1/2" per side. IF the tires are really 30" and not 29.5" which is typical. Not every tire is exactly the size listed. Check the manufacture. I'll use the BFG All-Terrian tires for example. The 30" tire is actually 29.5" in diameter. And the 235/75R15 is 29" in diameter. That's a whole 1/4" diference per side.
BFG KO sizes


4.5" backspacing and 30" tires would be close. Real close. But I think you'll be fine with that set-up. You might end up doing a slight-bar crank, but nothing major.

_____________________________

"Some people spend an entire lifetime wondering if they made a difference.
The Marines don't have that problem."
-President Ronald Reagan

'87 S10-Blazer - SOLD
'93 S10-Blazer 4x4x4 - Sons DD, engine swap is done.
'00 S10-Blazer 4x4x4 - My

(in reply to Kellen)
Post #: 23
RE: 31/10.5/15 on stock blazer rim? - 9/8/2006 12:01:53 AM   
Kellen

 

Posts: 120
Joined: 7/21/2006
From: Woodstock, Ontario, Canada
Status: offline
Great! Thanks Hanr3. 15x8 with 4.5 inches of backspacing and 30/9.5 is what I'll go with.

(in reply to Hanr3)
Post #: 24
RE: 31/10.5/15 on stock blazer rim? - 9/8/2006 7:36:43 AM   
DetroitMuscle


Posts: 829
Joined: 2/22/2006
Status: offline
DetroitMuscle's photo gallery
KO's blow, 1 season on the ram and they have 25% treadlife left and its mainly a highway vehicle.


Id shop around for tires, I wouldnt put any BFG on my vehicles except the radial T/A because they last forever.


Just what ive experiences, Im going to run General Grabber AT/2's and If i dont like those its Nitto terragrapplers.

_____________________________



http://www.blazerforum.com/albumphoto.asp?albumid=150&asortType=1&apage=1

(in reply to Kellen)
Post #: 25
RE: 31/10.5/15 on stock blazer rim? - 9/8/2006 8:46:15 AM   
Kellen

 

Posts: 120
Joined: 7/21/2006
From: Woodstock, Ontario, Canada
Status: offline
Well I was planning on going with BFG mud terrain, but I think I might try out the Hercules Durango MT.

http://www.herculestireca.com/tireIndex/pdf/DurangoMT.pdf

They look decent and they are about $40 less per tire than the BFG.

< Message edited by Kellen -- 9/8/2006 8:49:44 AM >

(in reply to DetroitMuscle)
Post #: 26
RE: 31/10.5/15 on stock blazer rim? - 9/8/2006 2:39:20 PM   
tommyd

 

Posts: 218
Joined: 5/5/2006
Status: offline
tommyd's photo gallery
Detroit muscle you need to control how you drive, properly inflate your tires or get an alignment. I've gotten 80k on my BFG AT KO on my durango and I'm finally about ready to change them. The truck has done everything from running down trails in the woods to highway to city to dirt road driving.

Kellen - I have the BFG mud terrains on my blazer now 30x9.5 on stock wheels. They fit perfect and they are the best mud tire I have ever purchased. Incredable amount of grip in dry, muddy snowy conditions. They only thing they really lack were wet traction. After I realized that I went back and spent an extra $30 bucks to have them siped and now they are pretty much perfect tires in any condition. I've yet to have them on ice yet but we'll see in the near future here :)

_____________________________

'96 blazer LS 4x4 K&N FIPK Gen II Intake
SLP loudmouth resonator Lund Deflector
Pioneer Deck 30x9.5 BFG Mud Terrains
JBL w12 GTI MKII Powered by Crown bpx500.1

(in reply to Kellen)
Post #: 27
RE: 31/10.5/15 on stock blazer rim? - 1/13/2007 5:24:42 PM   
alphawhisky

 

Posts: 3
Joined: 11/12/2006
Status: offline
what is the stock bolt pattern?

(in reply to Kellen)
Post #: 28
RE: 31/10.5/15 on stock blazer rim? - 1/13/2007 7:13:38 PM   
swartlkk


Posts: 14299
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
swartlkk's photo gallery
5 on a 4.75" bolt circle.

_____________________________

Kyle-

2004 Rainier
1970 Chevelle - Resto
1974 K5 Blazer - Resto

(in reply to alphawhisky)
Post #: 29
Login OR Register now to post a reply to this forum topic.
Page:   <<   < prev  1 [2]

 
Blazer >> Modifications >> Tires and Wheels
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk14299
drperry3896
hanr33476
chevy lover3411
m00nwater3269
eurogoldls3121
paddle_grl2942
hillbillyino2884
wolfpack2784
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.