Blazer Forum Blazer Forum  
Chevy Blazer Forums
Chevrolet Blazer Forums
Chevrolet Blazer Blazer Forum   Classifieds   Photo Gallery   Search   Contact BF   Sponsors
  Blazer News   Member List   Forum FAQ   Timeslips   Recalls   TSBs   Calendars   Register   Login  

What the highest lift before you have to start tweaking everything else?

  Printable Version
Blazer >> Modifications >> Suspension Tech >> What the highest lift before you have to start tweaking everything else? Page: [1]
Login
Message << Older Topic   Newer Topic >>
What the highest lift before you have to start tweaking... - 11/1/2006 5:31:07 AM   
Jimmiero

 

Posts: 28
Joined: 3/3/2006
Status: offline
Jimmiero's photo gallery
Ive heard that if you go any higher than a 4" suspsion lift you have to tilt your drive shaft or something of that nature is this true? I already have a 3" body lift and wanted more. I also have a set of 2" lift blocks and add a leafs sitting in garage if i buy a 4" lift kit could i just add my 2" blocks onto the 4" ones to make it 6?

_____________________________

81 GMC Jimmy 4x4 3" body lift, 33" tires, Goodrench Crate 350, Turbo 350 Trnny, Rancho adjustables, 12 bolt Rearend with 3.08s.
Post #: 1
RE: What the highest lift before you have to start twea... - 11/6/2006 11:27:52 AM   
Cow Killer


Posts: 66
Joined: 6/11/2006
From: lima ohio(school) quakertown pa(home)
Status: offline
Cow Killer's photo gallery
for fullsize gods, go to www.ck5.com they will help u with anything fullsize.


if i remeber right, 4 inch is max on stock parts. the slipyolk in the xfer case will come out if any bigger.also the stock axles almost at thrie max for tire size. 35's are about max for a dana 44/12 bolt setup unless u are only driving it on the street, or baby it off road.

_____________________________

Corey Zakeosian Diesel Mechanic
1998 S10 Blazer 4.3 ,5 speed man,2 in body lift, cranked bars, 2 inch shackles, 31x10.5 MTR's
1983 F250 6.9 diesel, long tube headers, turned up injection pump, straight pipes. gets better mileage than the blazer.

(in reply to Jimmiero)
Post #: 2
RE: What the highest lift before you have to start twea... - 11/6/2006 3:08:41 PM   
cody32401


Posts: 106
Joined: 10/16/2006
Status: offline
cody32401's photo gallery
we did 10-12 inch whiplash lift on a dodge only thing we had to change was the front driveshaft had to get it custom built

(i wouldnt recommend this though)

to many shots a jager since then cant remember what all was changed out but it came with everything you needed

_____________________________

Go Dux
03 2dr 2wd 4.3 Vortec
3/3 in Ground Force lowering kit,K&N CAI,Carriage Works Billet Grill,Clear Corners, Shaved Roof Rack (in the works atm)
Just cruisin down town Gainesville

(in reply to Cow Killer)
Post #: 3
RE: What the highest lift before you have to start twea... - 11/15/2006 3:15:23 PM   
LunchBox

 

Posts: 60
Joined: 6/19/2006
Status: offline

quote:

ORIGINAL: Jimmiero
could i just add my 2" blocks onto the 4" ones to make it 6?



Not if you value your life. Very bad, bad, icky things will happen. Seriously, never stack blocks...

_____________________________

"Let your anger be as a monkey in a pinata, hiding with the candy, hoping the children do not break through with a stick."


(in reply to Jimmiero)
Post #: 4
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Blazer Forums >> Modifications >> Suspension Tech
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
swartlkk14528
drperry3901
hanr33482
chevy lover3411
m00nwater3269
eurogoldls3121
paddle_grl2944
hillbillyino2885
wolfpack2844
xblazer012659

New Vendors
AMSOIL - Performance Oil Technology

Add Blazer Forum to your favorites Contact Us | Advertising | Partners | About Us | Archive | Links | Link To Us | Legal | Privacy Policy | © Blazer Forum

Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.