ZR2 suspention in a 4 door SLE

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

ZR2 suspention in a 4 door SLE

Printable Version

Blazer >> Modifications >> Suspension Tech >> ZR2 suspention in a 4 door SLE

Page: [1]

Message

<< Older Topic Newer Topic >>

ZR2 suspention in a 4 door SLE - 1/24/2007 7:42:23 PM

jessesjimmy

Posts: 5
Joined: 1/24/2007
Status: offline

dose anyone know how the ZR2 gets the extra 2 inches of front lift is it the torsion bars or the torsion keys, and do they/can they be swithced with thouse of a reguler 4 door blazer? same with the rear set up dose the ZR2 get its lift from the springs or from shacles, will they work on a 4 door?

Post #: 1

RE: ZR2 suspention in a 4 door SLE - 1/24/2007 10:18:29 PM

Kordog

Posts: 403
Joined: 10/22/2006
Status: offline

The whole set up is different. The knuckles, the cv joints, etc. The actual trac width is wider also. I want to do this on mine also, but it is alot of work including different rear axle and spring mounts. Korey.

_____________________________

Korey
2000 Blazer LT, 30X9.5x15 Dueler AT, Cold air intake, Magnaflow exhaust.
ASE Master Auto Tech.

(in reply to jessesjimmy)

Post #: 2

RE: ZR2 suspention in a 4 door SLE - 2/4/2007 11:01:30 PM

tippmann243

Posts: 19
Joined: 2/3/2007
Status: offline

the frame mounting points for the front suspension are also unique to the zr2's

(in reply to Kordog)

Post #: 3

RE: ZR2 suspention in a 4 door SLE - 2/28/2007 8:47:43 PM

Blaze99

Posts: 10
Joined: 12/16/2005
Status: offline

so i should stop trying to find a junk ZR2 for parts to use on my 4dr i take it then

_____________________________

99 Chevy Blazer
90 Chevy Beretta Indy 500 Pace Car (Teal)

www.freewebs.com/xtremethrillerz

(in reply to tippmann243)

Post #: 4

RE: ZR2 suspention in a 4 door SLE - 3/3/2007 1:14:21 PM

Kordog

Posts: 403
Joined: 10/22/2006
Status: offline

Yeah, that is about it. I have the local body shop on look out for me on a totaled ZR2 so I can rob the suspension. It will be allot of work, and maybe just finding a 2-4" suspension lift would be a better route. Then just get rims with some different offset to make the track width wider. Korey

_____________________________

Korey
2000 Blazer LT, 30X9.5x15 Dueler AT, Cold air intake, Magnaflow exhaust.
ASE Master Auto Tech.

(in reply to Blaze99)

Post #: 5