RE: Cheap way to improve hp
Login  | |
|
RE: Cheap way to improve hp - 2/26/2007 11:31:24 AM
|
|
|
PittBlazer
Posts: 13
Joined: 1/19/2007
Status: offline
|
well you can start with a new air filter i got a K&N, they can be bought at parts america or pep boys they are univeral fit. After that you can get a new exhaust system that will set you back a couple hundred of bucks for a good one, I 2.25" pipes going into a glaspack, loud as hell, but it rumbbles, you can get those at any good muffler shop. they will increase you HP a little but nothing hugh for that your going to need major work or invest in EDGE products. oh yea and hope you have gass money for the Huge HP you wanna add.
01 blazer LT. 4.3L V6, 30x9.5x15 mudders, 2in suspension lift and glasspack.
|
|
|
|
|
|
|
RE: Cheap way to improve hp - 2/26/2007 2:59:11 PM
|
|
|
1slowblazer
Posts: 6
Joined: 1/31/2007
Status: offline
|
well, you can save up and get a nitrous kit thats probably going to be your best bang for your buck, and the newer systems have plenty of saftey features to keep you from blowing your engine up
|
|
|
|
|
RE: Cheap way to improve hp - 2/26/2007 10:26:22 PM
|
|
|
mcdangles44
Posts: 6
Joined: 2/26/2007
Status: offline
|
Well, the msd ignition put a little pep in my engine, not much though, throttle body spacer adds noticeable gas mileage but not speed, im about to get a cheap air intake without the heat shield though, I want it more for the sound heh.... and of course don't forget exhaust.
_____________________________
01 ZR2
Msd ignition, Cat-back exhaust, throttle body spacer.... oh and dont forget the C.B. haha
vroom vroom n stuff right?
|
|
|
|
|
RE: Cheap way to improve hp - 2/28/2007 8:16:10 PM
|
|
|
02 Vortech
Posts: 279
Joined: 12/11/2004
Status: offline
|
75 shot of nitrous, cut-out before cat-'s, UD pullies, intake, traction bars, gears, stall, tuning.
_____________________________
CUSTOM REARMOUNT TURBO BLAZER - 11psi
8.36 @ 83m
|
|
|
|
|
RE: Cheap way to improve hp - 2/28/2007 8:48:44 PM
|
|
|
KLBlazer07
Posts: 254
Joined: 1/9/2007
From: Vancouver, BC
Status: offline
|
How much would it cost to get a nitrous kit installed at a shop?
_____________________________
2000 Chevy Blazer LS 2DR 4x4
Magnaflow Exhaust
Sirius Satellite Radio
|
|
|
|
|
RE: Cheap way to improve hp - 2/28/2007 9:20:55 PM
|
|
|
02 Vortech
Posts: 279
Joined: 12/11/2004
Status: offline
|
they quoted me $400. thats why i learned to do it myself. its pretty easy compared to building my own turbo set-up. just some wiring and thats about it.
you'll want-
window switch
purge
automatic bottle heater
for accesories.
_____________________________
CUSTOM REARMOUNT TURBO BLAZER - 11psi
8.36 @ 83m
|
|
|
|
|
RE: Cheap way to improve hp - 2/28/2007 9:37:49 PM
|
|
|
KLBlazer07
Posts: 254
Joined: 1/9/2007
From: Vancouver, BC
Status: offline
|
Yeah, I just gotta find a shop around here that does this kind of thing to see what they quote me. Too bad you don't live closer, id pay you to do it.
_____________________________
2000 Chevy Blazer LS 2DR 4x4
Magnaflow Exhaust
Sirius Satellite Radio
|
|
|
|
|
RE: Cheap way to improve hp - 3/1/2007 6:57:47 PM
|
|
|
02 Vortech
Posts: 279
Joined: 12/11/2004
Status: offline
|
its not bad @ all. are you good with any wrenching. i can help you through it if oyu like.
_____________________________
CUSTOM REARMOUNT TURBO BLAZER - 11psi
8.36 @ 83m
|
|
|
|
|
RE: Cheap way to improve hp - 3/1/2007 7:46:39 PM
|
|
|
KLBlazer07
Posts: 254
Joined: 1/9/2007
From: Vancouver, BC
Status: offline
|
Yeah, its more I don't trust myself or if I do something wrong im gonna mess my motor or have leaks or something like that..
_____________________________
2000 Chevy Blazer LS 2DR 4x4
Magnaflow Exhaust
Sirius Satellite Radio
|
|
|
|
|
RE: Cheap way to improve hp - 3/2/2007 3:26:17 PM
|
|
|
blazerlt01
Posts: 281
Joined: 1/15/2007
From: Chicago
Status: offline
|
intake, exhaust, smaller lighter pulleys, better plugs and wires that's about it for the cheap hp gain but to do anything major you're talking paying money, nitrous isn't a bad way to go, but then you have to keep in mind that you have to get refills when it runs out.
_____________________________
LUMINICS JDM YELLOW LOWS & FOGS
265/70R15 YOKOHAMA SUPER DIGGERS
CAI
ALPINE HEAD UNIT
ROCKFORD FOSGATE 1000AMP
2-12" PIONEER PREMIER SUBS IN CUSTOM BOX
|
|
|
|
|
RE: Cheap way to improve hp - 3/29/2007 2:49:30 PM
|
|
|
EuroGoldLS
Posts: 3121
Joined: 2/9/2007
From: Princeton, NC, USA
Status: offline
|
go to Auto zone, there is an intake called a spectre, it is a modular system. buy a 11.5 inch filter, 3" coupler, a 3'' 60 degree elbow. The total should be around 70 bucks. Intalled it should look like this: http://i159.photobucket.com/albums/t147/Eurogoldls/100_0224.jpg
< Message edited by EuroGoldLS -- 3/29/2007 5:09:10 PM >
_____________________________
My theory is that every disrict in the USA tries to send their lying scumbags to either prison or Washington D.C. -rivereye
|
|
|
|
|
RE: Cheap way to improve hp - 3/29/2007 2:59:18 PM
|
|
|
swartlkk
Posts: 14499
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
|
No isolation from engine heat... The colder you can keep the incoming air, the more dense it will be, and the more efficient your engine will be. Having a cone air filter sucking in hot air is like shooting yourself in the foot.
_____________________________
Kyle-
04 Rainier
My Restoration Projects
Please Do Not PM for Tech Help
|
|
|
|
|
RE: Cheap way to improve hp - 3/29/2007 4:20:10 PM
|
|
|
EuroGoldLS
Posts: 3121
Joined: 2/9/2007
From: Princeton, NC, USA
Status: offline
|
Oh, sorry, my blazer has a scoop down below that ducts air to the front of the filter. It blastes air through the filter to cool it and give it more CFM.
_____________________________
My theory is that every disrict in the USA tries to send their lying scumbags to either prison or Washington D.C. -rivereye
|
|
|
|
|
RE: Cheap way to improve hp - 3/29/2007 4:31:39 PM
|
|
|
swartlkk
Posts: 14499
Joined: 5/1/2005
From: Waterloo, NY
Status: offline
|
What, did you cut a hole through the inner fender? It still is not as good as if it were isolated from the engine bay. I bet you would see a noticable decrease in your IAT readings if you were to enclose the filter in some kind of housing and duct air into it from either in front of the radiator or underneith away from any engine bay heat.
*EDIT* - Oh and Euro, could you resize that pic down to around 640x480 to help those members without highspeed and/or huge monitors?
< Message edited by swartlkk -- 3/29/2007 4:32:49 PM >
_____________________________
Kyle-
04 Rainier
My Restoration Projects
Please Do Not PM for Tech Help
|
|
|
|
|
RE: Cheap way to improve hp - 3/29/2007 5:12:27 PM
|
|
|
EuroGoldLS
Posts: 3121
Joined: 2/9/2007
From: Princeton, NC, USA
Status: offline
|
cut a hole? NEVER. I just unclipped the fender housing and run the 3'' duct between the rubber and the frame and sealed it with another peice of rubber that was cut to fita nd it clips into the holes that are already there.
_____________________________
My theory is that every disrict in the USA tries to send their lying scumbags to either prison or Washington D.C. -rivereye
|
|
|
|
|
RE: Cheap way to improve hp - 4/1/2007 2:56:37 AM
|
|
|
BobTheBlazer
Posts: 892
Joined: 2/15/2007
From: Crossville, TN
Status: offline
|
quote:
ORIGINAL: blazinloud
unless your planning on doing major engine mods.....its not worth the money. Use the saved cash to buy a vehicle meant for speed.
I agree. Besides, you only need so much HP to go where you gotta go, any more and you'll just wrap it around a tree. Also, more HP costs more money in gas.
_____________________________
"Bob The Blazer" - Being parted out...WAAAHH!
"Shebby" - ''90 Dodge Daytona Shelby, the love of my life!
"Superman" - Blue and red ''90 Toyota pickup
''88 Mazda RX-7 - gonna kick ass soon!
|
|
|
|
|
Printable Version
