coil wire problem?
Login | |
|
coil wire problem? - 3/22/2007 9:39:51 PM
|
|
|
Chops
Posts: 8
Joined: 1/31/2007 Status: offline
|
when i first bought my blazer off this guy lastyear i could tell he hadnt change the plugs,cap,and wires along wiht a whole list of things. and when changing them i noticed that my coil wire fit the cap but not the coil. My blazer is a late 95 build so it has a bunch of the 96 parts and i went to my local dealer and he gave me another wire to try but it also dident fit i was wondering if anyone else has this problem and where i can goto get a new coil wire!
_____________________________
KyLe, 1995 Blazer LT, 4.3L Vortec, 4Door 4WD Custom Clear Corners,Catback exhaust summer mods-K&N Cold Air,gutted cat and custom y-pipe
|
|
|
|
|
|
RE: coil wire problem? - 3/23/2007 1:49:51 PM
|
|
|
cheetah
Posts: 18
Joined: 3/7/2007 Status: offline
|
Didn't fit? It had a soft rubber boot that very flexable, but the dry rubber can catch on the plastic. Try adding some dielectric grease? If the grease does not work, post a pic.
_____________________________
1996 Chevy Blazer - 4.3 Vortec Thats Louder Than Two Screaming Kids Fighting Over An Ice Cream Cone In The Back Seat "A limited slip is for limited off-roading" 3.73's | Locker | Metallaic Forest Green | Factory Motor Currently Being Rebuilt
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Blazer Prices
Chevy Blazer
Trailblazer SS
Advertising Info
|
Blazer Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|