lift question

	Blazer Forum Classifieds Photo Gallery Search Contact BF Sponsors
Blazer News Member List Forum FAQ Timeslips Recalls TSBs Calendars Register Login

lift question

Printable Version

Blazer Forums >> Modifications >> Suspension Tech >> Lifting Tech >> lift question

Page: [1]

Message

<< Older Topic Newer Topic >>

lift question - 4/16/2007 2:04:36 PM

cyukio

Posts: 56
Joined: 4/16/2007
Status: offline

hey everybody im a new member just want to tell everybody this site rocks. my question is, i have a 97 blazer 2x4 and im planning on getting the fabtech 3.5 spindle lift and a 2" body. will i be able to clear 31x11.50 on 15x10s without cutting or shaving? if not whats the widest rim size and tires can i go. and does anybody have a picture of a similar lift.

Post #: 1

RE: lift question - 4/16/2007 4:24:25 PM

982DRBlack

Posts: 23
Joined: 3/28/2007
Status: offline

Well Ive got a 2" Superlift on my 4x4 and Im running 30x10.5R15 BFG A/Ts The fronts when turned do rub on my fender flares. But if your going up another 1.5 inches ontop of a 2" body lift I would think youd be past the rubbing stage. Then your only concern would be backspacing. And Im not one to talk to about that yet.

How will you be getting your lift in the rear?

(in reply to cyukio)

Post #: 2

RE: lift question - 5/5/2007 6:00:17 PM

iaml3lue

Posts: 2
Joined: 5/4/2007
Status: offline

hey i could be wrond but arent 2wd blazers lower than their 4wd counter parts like i said i could be an most likly am wrong

(in reply to 982DRBlack)

Post #: 3