Will this intake fit?

Printable Version

Blazer >> Modifications >> Performance & Brainstorming >> Will this intake fit?

Page: [1]

Login Message << Older Topic   Newer Topic >>

Will this intake fit? - 4/19/2007 11:39:35 PM    joshua   Posts: 9 Joined: 3/26/2007 Status: offline Take a look at this intake: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=017&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=270111142757&rd=1&rd=1 It seems good for the price - a long cone and heat shield. My question is this: I have a 04 Blazer, but the item says its only compatible with up to an 03 Blazer, but an 04 Jimmy. Is there really a difference between the 03 and 04 Blazer engine compartment? This will fit in my 04 Blazer, right??? Post #: 1

RE: Will this intake fit? - 4/19/2007 11:53:29 PM    speeddemon560 Posts: 496 Joined: 1/4/2007 Status: offline Yes, it will fit.  The engine compartments are the same.  Just remember that shipping is $20, so for everything, it'll be close to $70.... _____________________________ 2000 Blazer gettin' pimped http://s168.photobucket.com/albums/u167/speeddemon560 My dash with Nu Image Platinum stuff. (in reply to joshua) Post #: 2

RE: Will this intake fit? - 4/19/2007 11:57:21 PM    joshua   Posts: 9 Joined: 3/26/2007 Status: offline Great, thanks for the quick reply. $70 for a filter and heat shield with all the piping... that ain't bad, right? It seems to be pretty much the same thing you'd get with Spectre or even K&N. And I kinda like the black pipes. What do yall think? (in reply to speeddemon560) Post #: 3

RE: Will this intake fit? - 4/20/2007 12:02:02 AM    speeddemon560 Posts: 496 Joined: 1/4/2007 Status: offline The only things is....I don't know how effective the heat shield is.  It seems to be pretty small and it looks like a 2-piecer.  The K&N heat shields are very effective because they properly block off the rest of the engine compartment from the the air filter, thus not allowing the engine to suck up that hot air.  So I have no idea how effective this is.  Other people will probably post their opinions soon.  Good luck!  _____________________________ 2000 Blazer gettin' pimped http://s168.photobucket.com/albums/u167/speeddemon560 My dash with Nu Image Platinum stuff. (in reply to joshua) Post #: 4

RE: Will this intake fit? - 4/20/2007 12:06:21 AM    joshua   Posts: 9 Joined: 3/26/2007 Status: offline You may have a point about the heat shield. I can't really tell from the photos. Here's another photo that shows it a little better: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=009&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=190103357941&rd=1,1 (in reply to speeddemon560) Post #: 5

RE: Will this intake fit? - 4/21/2007 2:20:53 AM    joshua   Posts: 9 Joined: 3/26/2007 Status: offline Well, I went ahead and ordered it. I'll let you guys know how it turns out when I get it in. (in reply to joshua) Post #: 6

RE: Will this intake fit? - 8/13/2007 1:44:41 PM    FirehawkNS Posts: 423 Joined: 8/6/2007 From: Charlotte, NC (Lucia) Status: offline Any word on how it turned out?  _____________________________ 2001 Blazer LT, 1999 Camaro Z28, 2004 Acura RSX www.pewterz28.com Flickr.com (in reply to joshua) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Blazer Prices

Chevy Blazer
Trailblazer SS

Top 10 Posters
swartlkk 14499 drperry 3901 hanr3 3482 chevy lover 3411 m00nwater 3269 eurogoldls 3121 paddle_grl 2944 hillbillyino 2884 wolfpack 2838 xblazer01 2659

New Vendors
AMSOIL - Performance Oil Technology